S5700-28C-HI-24S-AC Huawei S5700 Series Switch Price & Product Datasheet

Product Model: S5700-28C-HI-24S-AC

Retail Price: Price expired

Email Us To Get Special Price Today: [email protected]

The S5700-28C-HI-24S-AC is an advanced gigabit Ethernet switch developed by Huawei, providing flexible gigabit access. With 24 10/100/1,000 Base-T ports and 1 extended slot, it has several kinds of subcards to select, providing excellent Net Stream function, flexible Ethernet networking, comprehensive VPN tunneling technologies, diversified security mechanisms, and mature IPv6 features for users. Besides, it is easy to install, manage and maintain. All these features make the S5700-28C-HI-24S-AC the best choice as an access switch on large and medium-sized campus networks or data centers and an aggregation switch on small campus networks.

Quick Specs

Figure 1 shows the appearance of Huawei S5700-28C-HI-24S-AC switch.

Product Code

S5700-28C-HI-24S-AC

Ports

24 x 100/1,000 Base-X ports

Extended Slots

1 extended slots

Memory (RAM)

512 MB

Flash

64 MB

MAC Address Table Size

32 MAC

Forwarding performance

96 Mpps              

Switching capacity

256 Gbit/s

Subcard Supported

4 x 1000 Base-X SFP subcard

2 x 10 GE SFP+ subcard

4 x 10 GE SFP+ subcard

Voltage Required

AC:

Rated voltage range: 100V to 240V, 50/60 Hz Maximum voltage range: 90V to 264V, 50/60 Hz

DC:

Rated voltage range: ¨C48V to ¨C60V

Maximum voltage range: ¨C36V to ¨C72V

Power Device

Double hot-swappable AC/DC power supplies

Dimensions (W x D x H)

442 mm x 220 mm x 43.6 mm

Package Weight

5.1 kg

Product Details

Figure 2 shows the front panel of HuaweiS5700-28C-HI-24S-AC switch.

Note:

¢Ù

Power module slot 1

¢Ú

ESD jack

¢Û

One console port

¢Ü

ETH management port

¢Ý

USB port

¢Þ

Twenty-four 100/1000BASE-X ports

Applicable modules

¢ß

Front card slot

¢à

Power module slot 2

*The module has been installed in the power module slot in the diagram. The power modules should be purchased separately.

*Before installing or maintaining a switch, wear an ESD wrist strap and insert the other end of the ESD wrist strap into this ESD jack.

Figure 3 shows the back panel of Huawei S5700-28C-HI-24S-AC switch.

Note:

¢Ù

Ground screw

¢Ú

Monitoring port

*The ground screw is used with a ground cable. The switch has two ground screws, any of which can be used to install a ground cable.

*The monitoring port monitors the cabinet door, power module, battery power, and power supply of the air conditioner.

Recommended Modules

Table 2 shows the recommended modules.

 

Model

Description

PowerModule

W0PSA1701

170W AC Power Module(Used In HI Series)

Optical Transceivers

OMXD30000

Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC)

OSX010000

Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC)

SFP-10G-USR

10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC)

SFP-FE-SX-MM1310

Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC)

eSFP-FE-LX-SM1310

Optical Transceiver,eSFP,100M/155M,Single-mode Module(1310nm,15km,LC)

S-SFP-FE-LH40-SM1310

Optical Transceiver, eSFP,  FE, Single-mode Module(1310nm,40km,LC)

eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC)

SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC)

S-SFP-GE-LH40-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC)

S-SFP-GE-LH40-SM1550

Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC)

Copper Transceivers

SFP-1000BASET

1000BASE-T (RJ45) SFP Electrical Module , Auto Negotiate,100m

Card

ES5D00G4SC00

4 Gig SFP interface card(used in S5700HI series)

Compare with Similar Item

Table 3 shows the comparison of HuaweiS5700-28C-HI, S5700-28C-HI-24S and S5700-28C-HI-24S-AC.

Models          

S5700-28C-HI

S5700-28C-HI-24S

S5700-28C-HI-24S-AC

Fixed Ports

24 x 10/100/1,000 Base-T

24 x 100/1,000 Base-X

24 x 100/1,000 Base-X

Extended Slots

1 extended slots

1 extended slots

1 extended slots

Power Supply

Double swappable AC/DC power supplies

Double swappable AC/DC power supplies

Double swappable AC/DC power supplies

Forwarding Performance

96 Mpps

 96 Mpps

96 Mpps

Switching Capacity

256 Gbit/s 

  256 Gbit/s 

256 Gbit/s 

Before Purchasing

Do you have any question about the Huawei S5700-28C-HI-24S-AC switch?

Contact us – Email Live Chat or [email protected].

Specification

S5700-28C-HI-24S-AC Datasheet

S5700-28C-HI-24S-AC Specification

MAC address table

IEEE 802.1d compliance

MAC address learning and aging

Static, dynamic, and blackhole MAC address entries

Packet filtering based on source MAC addresses

MAC address entries: 
S5700S-LI series: 8K, S5700-LI/S5700-SI series: 16K, S5700-EI series: 32K, S5720-EI series: 64K, S5700-HI series: S5700-HI: 32K, S5710-HI: 456K, S5720-HI: 128K

VLAN

4K VLANs

Guest VLAN and voice VLAN

GVRP

MUX VLAN

VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports

1:1 and N:1 VLAN Mapping

SuperVLAN(supported by the S5700-SI/S5700-EI/S5700-HI series)

Ring protection

RRPP ring topology and RRPP multi-instance

Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover

SEP

ERPS(G.8032)(supported by the S5700-LI/S5700-SI/S5700-EI/S5700-HI series)

STP, RSTP, and MSTP

BPDU protection, root protection, and loop protection

BPDU Tunnel

Reliability

Ethernet OAM (IEEE 802.3ah and 802.1ag)

ITU-Y.1731

DLDP

LACP

E-Trunk(supported by the S5700-SI/S5700-EI/S5700-HI series)

BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM (supported by the S5700-EI/S5700-HI series)

MPLS features

MPLS L3VPN

MPLS L2VPN(VPWS/VPLS)

MPLS-TE

MPLS QoS

Notes: supported by S5710-EI, S5700-HI and S5710-HI

IP routing

Static routing

RIPv1, RIPv2 and RIPng,ECMP(supported by the S5700-SI/S5700-EI/S5700-HI series)

OSPF, OSPFv3, IS-IS, IS-ISv6, BGP and BGP4+ (supported by the S5700-EI/S5700-HI series)

IPv6 features

Neighbor Discovery (ND)

Path MTU (PMTU)

IPv6 ping, IPv6 tracert, and IPv6 Telnet

ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type

MLD v1/v2 snooping

6to4 tunnel, ISATAP tunnel, and manually configured tunnel(supported by the S5700-SI/S5700-EI/S5700-HI series)

Multicast

IGMP v1/v2/v3 snooping and IGMP fast leave

Multicast forwarding in a VLAN and multicast replication between VLANs

Multicast load balancing among member ports of a trunk

Controllable multicast

Port-based multicast traffic statistics

IGMP v1/v2/v3, PIM-SM, PIM-DM, PIM-SSM, MSDP (supported by the S5700-EI/S5700-HI series)

QoS/ACL

Rate limiting on packets sent and received by an interface

Packet redirection

Port-based traffic policing and two-rate three-color CAR

Eight queues on each port

WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms

WRED (supported by the S5710-EI and S5700-HI)

Re-marking of the 802.1p priority and DSCP priority

Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID

Rate limiting in each queue and traffic shaping on ports

Security

User privilege management and password protection

DoS attack defense, ARP attack defense, and ICMP attack defense

Binding of the IP address, MAC address, interface, and VLAN

Port isolation, port security, and sticky MAC

MFF

Blackhole MAC address entries

Limit on the number of learned MAC addresses

802.1x authentication and limit on the number of users on an interface

AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC

SSH v2.0

Hypertext Transfer Protocol Secure (HTTPS)

CPU defense

Blacklist and whitelist

Access Security

DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security

Management and maintenance

Virtual cable test

Port mirroring and RSPAN (remote port mirroring)

Remote configuration and maintenance using Telnet

SNMP v1/v2c/v3

RMON

Web NMS

HGMP

System logs and alarms of different levels

802.3az EEE (supported by the S5700(S)-LI, S5710-EI, S5700-HI and S5710-HI)

Dying gasp (supported by the S5700-HI, S5710-HI and S5700(S)-LI(except battery LAN switches)

NetStream (supported by the S5710-EI, S5700-HI and S5710-HI)

sFlow(supported by the S5700(S)-LI/S5700-EI/S5700-HI series)

Interoperability

Supports VBST (Compatible with PVST/PVST+/RPVST)

Supports LNP (Similar to DTP)

Supports VCMP (Similar to VTP)

Operating environment

Operating temperature: 0¡æ¨C50¡æ

Relative humidity: 10%¨C90% (non-condensing)

Input voltage

AC:

-Rated voltage range: 100 V to 240 V AC, 50/60 Hz

-Maximum voltage range: 90 V to 264 V AC, 47/63 Hz

DC:

-Rated voltage range: ¨C48 V to ¨C60 V, DC

-Maximum voltage range: ¨C36 V to ¨C72 V DC

Note: PoE-support switches do not use DC power supplies.

Leave a Comment

Your email address will not be published. Required fields are marked *

Call Us Now
Scroll to Top

Warning: error_log(/www/wwwroot/corenet.vip/wp-content/plugins/spider-analyser/#log/log-1923.txt): Failed to open stream: Permission denied in /www/wwwroot/corenet.vip/wp-content/plugins/spider-analyser/spider.class.php on line 2853