Product Model: S5310-52C-EI
Retail Price: Price expired
Email Us To Get Special Price Today: [email protected]
Huawei S5300 Series switch S5310-52C-EI Mainframe 48 GE RJ45,4 10GE SFP+, Dual Slots of power and Flexible Card,Without Flexible Card and Power Module, Enhanced Layer 3 Features.
Quick Specs
Figure 1 shows the appearance of S5310-52C-EI.
Table 1 shows the Quick Specs.
Product Code |
S5310-52C-EI |
Maximum stack bandwidth (bidirectional) |
160 Gbit/s |
Stack ports |
Four fixed 10GE SFP+ ports on the front panel or ports on the 2-port 10GE rear card |
Mean time between failures (MTBF) |
45.57 years when a 8xGE optical interface card is configured; 44.85 years when a 8xGE electrical interface card is configured; 43.33 years when a 2x10GE interface card is configured |
Memory |
512 MB |
Flash |
200 MB |
Available Version |
V200R002C00 to V200R005C02 NOTE: These chassis models are not supported in V200R003C02 and V200R005C01. |
Maximum system power consumption (100% throughput, full speed of fans) |
146.9 W |
Dimensions (W x D x H) |
442.0 mm x 420.0 mm x 43.6 mm When a 1150 W power module is installed, it extrudes out from the chassis. Therefore, the total depth of the switch changes to 507.3 mm |
Weight |
Fully loaded ¡Ü 10 kg Empty ¡Ü 6 kg |
Product Details
Figure 2 shows the front panel of S5310-52C-EI.
Note:
¢Ù |
Forty-eight 10/100/1000BASE-T Ethernet electrical ports |
¢Ú |
Four 10GE SFP+ Ethernet optical ports Applicable modules and cables:
|
¢Û |
One ETH management port |
¢Ü |
One Mini USB port |
¢Ý |
One console port |
¢Þ |
One USB port |
Figure 3 shows the back panel of S5310-52C-EI.
Note:
¢Ù |
Ground screw NOTE: It is used with a ground cable. |
¢Ú |
RCard slot 1 NOTE: For details about the mapping between cards and switches, see Cards. |
¢Û |
Card slot 2 NOTE: For details about the mapping between cards and switches, see Cards. |
¢Ü |
Bar code label NOTE: This label is drawable, and you can pull it outward to view the bar code and MAC address of the switch. |
¢Ý |
Power module slot 2 NOTE: Available power modules: l 150 W AC Power Module l 150 W DC Power Module |
¢Þ |
Power module slot 1 NOTE: Available power modules: l 150 W AC Power Module l 150 W DC Power Module |
The Modules
Table 2 shows the recommended elements for the S5310-52C-EI.
Model |
Description |
FE-SFP Optical Transceiver |
|
SFP-FE-SX-MM1310 |
Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC) |
eSFP-FE-LX-SM1310 |
Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC) |
S-SFP-FE-LH40-SM1310 |
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC) |
GE-SFP Optical Transceiver |
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
10G-SFP+ Optical Transceiver |
|
SFP-10G-USR |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
OMXD30000 |
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
OSX010000 |
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
GE Copper Transceiver |
|
SFP-1000BaseT |
Electrical Transceiver, SFP, GE, Electrical Interface Module(100m, RJ45) |
Compare to Similar Items
Table 3 shows the comparison of S5310-52C-EI and
Product Code |
S5310-52C-EI |
S5300-28X-LI-24S-AC |
Mean time between failures (MTBF) |
45.57 years when a 8xGE optical interface card is configured; 44.85 years when a 8xGE electrical interface card is configured; 43.33 years when a 2x10GE interface card is configured |
89.91 years |
Memory |
512 MB |
256 MB |
Flash |
200 MB |
200 MB |
Power consumption |
146.9 W |
<54W |
Dimensions (W x D x H) |
442.0 mm x 420.0 mm x 43.6 mm When a 1150 W power module is installed, it extrudes out from the chassis. Therefore, the total depth of the switch changes to 507.3 mm |
442 mm x 220 mm x 43.6 mm |
Weight |
Fully loaded ¡Ü 10 kg Empty ¡Ü 6 kg |
¡Ü 5 kg |
Before Purchasing
Do you have any question about the S5310-52C-EI?
Contact us – Email Live Chat or [email protected].
S5310-52C-EI Datasheet
S5310-52C-EI Specification |
|
Memory (RAM) |
512 MB |
Flash |
200 MB |
Mean time between failures (MTBF) |
45.57 years when an 8-port GE optical card is configured, 44.85 years when an 8-port GE electrical card is configured, 43.33 years when a 2-port 10GE interface card is configured |
Mean time to repair (MTTR) |
2 hours |
Availability |
> 0.99999 |
Service port surge protection |
Common mode: ±2 kV |
Power supply surge protection |
Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode Using DC power modules: ±1 kV in differential mode, ±2 kV in common mode |
Dimensions (W x D x H) |
442.0 mm x 420.0 mm x 44.4 mm (17.4 in. x 16.5 in. x 1.75 in.) |
Weight |
Empty: ≤ 6 kg (13.23 lb) Fully loaded: ≤ 10 kg (22.05 lb) |
Stack ports |
Four fixed 10GE SFP+ ports on the front panel or ports on the 2-port 10GE rear card |
RPS |
Not supported |
PoE |
Not supported |
Rated voltage range |
100 V AC to 240 V AC, 50/60 Hz -48 V DC to -60 V DC |
Maximum voltage range |
90 V AC to 264 V AC, 47 Hz to 63 Hz -36 V DC to -72 V DC |
Maximum power consumption (100% throughput, full speed of fans) |
146.9 W |
Operating temperature |
0°C to 50°C (32°F to 122°F) at an altitude of 0-1800 m (0-5096 ft.) |
Storage temperature |
-40°C to +70°C (-40°F to +158°F) |
Noise under normal temperature (27°C, sound power) |
< 53.9 dBA |
Relative humidity |
5% to 95%, noncondensing |
Operating altitude |
AC power modules configured: 0-5000 m (0-16404 ft.) DC power modules configured: 0-2000 m (0-6562 ft.) |
Certification |
EMC certification Safety certification Manufacturing certification |