Product Model: S2710-52P-PWR-SI
Retail Price: US$566.10
Email Us To Get Special Price Today: [email protected]
The S2700 is provided in the standard version (SI) and enhanced version (EI). The S2700 switches of the EI series are collectively called S2700-EI, and the S2700 switches of the SI series are collectively called S2700-SI. S2710-SI is a sub-series switch of S2700-SI. Huawei S2710-52P-PWR-SI switch is a PoE switch, providing 48 Ethernet 10/100 PoE+ ports and 4 Gig SFP.
Quick Specs
Figure 1 shows the appearance of Huawei S2710-52P-PWR-SI switch.
Table 1 shows the Quick Specs.
|
Product Code |
S2710-52P-PWR-SI |
|
Downlink Ports |
48 Ethernet 10/100 PoE ports |
|
Uplink Ports |
4 Gig SFP |
|
PoE |
Supported |
|
Memory |
128 MB |
|
Flash |
16 MB |
|
Power |
Built-in power module |
|
Heat Dissipation |
Built-in fans for intelligent air cooling |
|
Dimensions (W x D x H) |
442.0 mm x 220.0 mm x 43.6 mm |
Product Details
Figure 2 shows the front panel of Huawei S2710-52P-PWR-SI switch.
Note:
|
¢Ù |
Forty-eight 10/100BASE-TX PoE ports |
¢Û |
Two 100/1000BASE-X ports |
|
¢Ú |
Two 1000BASE-X ports |
¢Ü |
One console port |
Figure 3 shows the back looking of Huawei S2710-52P-PWR-SI switch.
Note:
|
¢Ù |
Ground screw |
¢Ü |
Power module slot 2 |
|
¢Ú |
ESD jack |
¢Ý |
Power module slot 1 |
|
¢Û |
Fan slot |
The Transceiver
Table 2 shows the recommended optical transceivers.
|
Model |
Description |
|
FE-SFP Optical Transceiver |
|
|
SFP-FE-SX-MM1310 |
Optical Transceiver,SFP,100M/155M,Multi-mode Module(1310nm,2km,LC) |
|
eSFP-FE-LX-SM1310 |
Optical Transceiver,eSFP,100M/155M,Single-mode Module(1310nm,15km,LC) |
|
S-SFP-FE-LH40-SM1310 |
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm,40km,LC) |
|
GE-SFP Optical Transceiver |
|
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC) |
Compare to Similar Item
Table 3 shows the comparison of Huawei S2710-52P-PWR-SI and S2710-52P-SI-AC.
|
Models |
S2710-52P-PWR-SI |
S2710-52P-SI-AC |
|
Downlink Ports |
48 Ethernet 10/100 PoE ports |
48 Ethernet 10/100 ports |
|
Uplink Ports |
4 Gig SFP |
4 Gig SFP |
|
Power Supply |
Built-in power module |
AC |
|
PoE |
Supported |
None |
Before Purchasing
Do you have any question about the Huawei S2710-52P-PWR-SI switch?
Contact us – Email Live Chat or [email protected].
S2710-52P-PWR-SI Datasheet
S2710-52P-PWR-SI Specification |
|
|
Downlink ports |
48 × 10/100Base-TX Ethernet PoE ports |
|
Uplink ports |
4 × Gigabit SFP |
|
MAC address |
8K MAC address entries Manual deletion of dynamic MAC address entries Aging time of MAC address configurable Blackhole MAC address entries |
|
VLAN feature |
4K VLANs, complying with IEEE 802.1Q Port-based VLAN assignment |
|
N/A |
|
|
QoS |
Outbound-Port-based rate limiting and flow-based rate limiting 4 or 8 queues of different priorities on each port Mapping between 802.1p priorities and queues SP, WRR, and SP+WRR algorithms |
|
N/A |
|
|
IPv6 feature |
IPv6 protocol |
|
Multicast |
IGMP v1/v2/v3 snooping |
|
Reliability |
STP (IEEE |
|
Traffic sampling |
N/A |
|
Security & access features |
Storm suppression , IP Source Guard |
|
Multiple authentication methods including AAA, RADIUS, and TACACS+; |
|
|
Surge protection |
Surge protection capability of service ports: 6 kV (The surge protection capability of service ports on PoE switches is 1 kV.) |
|
Management |
Stack |
|
Operating environment |
Long-term operating temperature: –5°C to + 50°C |
|
Power |
AC: |
|
Dimensions (W x D x H) |
442 × 220 × 43.6 mm |
|
Weight |
S2710-52P-SI<3 kg |