Product Model: CISCO881-SEC-K9
Retail Price: US$331.00
Email Us To Get Special Price Now: [email protected]
The 10/100-Mbps fast Ethernet models of the Cisco 881 Integrated Services Routers combine Internet access, security and wireless services onto a single, secure device. This router offers broadband speeds and simplified management to small businesses, and enterprise small branch and teleworkers. CISCO881-SEC-K9 is the CISCO881-K9 bundle security function, supporting Security Cisco IOS Firewall, IPS, IPsec (3DES and AES), SSL VPN and IP BaseEntry-Level Cisco IOS Software Function.
Quick Specs
Figure 1 shows the appearance of CISCO881-SEC-k9.
Table 1 shows the Quick Specs.
|
Product Code |
CISCO881-SEC-K9 |
|
Bundle |
Security Function |
|
Rack Units |
1 RU |
|
WAN Ports |
1 x 10Base-T/100Base-TX – RJ-45 |
|
LAN Ports |
4 x 10Base-T/100Base-TX – RJ-45 |
|
Management Ports |
1 x console – RJ-45 |
|
USB |
1 x 4 PIN USB Type A |
|
DRAM |
256 MB (installed) / 768 MB (max) |
|
Flash Memory |
128 MB |
|
Dimensions |
32.5 cm x 24.9 cm x 4.4 cm |
|
Package Weight |
4.84 Kg |
Product Details
Figure 2 shows the front panel of CISCO881-SEC-K9.
Note:
|
① |
LED Area |
|
② |
USB Port for External Device |
If you need 3G wireless WAN option provided, Cisco 881G series would have a 3G card left beside the USB port, meeting your need.
Figure 3 shows the back panel of CISCO881-SEC-K9.
Note:
|
① |
WAN: 1 x 10Base-T/100Base-TX – RJ-45 |
⑤ |
Reset Button |
|
② |
LAN: 4 x 10Base-T/100Base-TX – RJ-45 |
⑥ |
Power Connector |
|
③ |
Management: 1 x console – RJ45 |
⑦ |
Security Cable Lock |
|
④ |
USB: 1 x 4 PIN USB Type A |
⑧ |
Power over Ethernet(Factory Option) |
· Four-port 10/100 Fast Ethernet managed switch with VLAN support; two ports support Power over Ethernet (PoE) for powering IP phones or external access points
· Secure 802.11g/n access-point option based on draft 802.11n standard with support for autonomous or Cisco Unified WLAN architectures
· CON/AUX port for console or external modem
· One USB 1.1 port for security eToken credentials, booting from USB, and loading configuration
Figure 4 shows the security bundle.
The Accessories
Table 2 shows the recommended accessories of CISCO881-SEC-K9
|
Items |
Description |
|
CAB-AC= |
CAB-AC= AC Power Cord (North America), C13, NEMA 5-15P, 2.1m |
|
CAB-ETH-S-RJ45 |
Cisco Router Cable CAB-ETH-S-RJ45 |
Compare to Similar Item
Table 3 shows the comparison between CISCO881-K9 and CISCO881-SEC-K9.
|
Models |
CISCO881-SEC-K9 |
CISCO881-K9 |
|
Product Type |
Router – 4-port switch (integrated) |
Router – 4-port switch (integrated) |
|
Bundle |
Security Bundle |
N/A |
|
DRAM |
256 MB (installed) / 768 MB (max) |
256 MB (installed) / 768 MB (max) |
|
Flash Memory |
128 MB |
128 MB |
Get more information
Do you have any question about the CISCO881-SEC-K9 router?
Contact us now via Live Chat or [email protected].
Specification
CISCO881-SEC-K9 Datasheet
CISCO881-SEC-K9 Specifications |
|
|
Default and maximum flash memory |
● 128 MB on Cisco 880 Series data, embedded 3G Wireless WAN (WWAN), and Cisco Unified Border Element models ● 256 MB on Cisco 880 Series Voice and SRST models ● 256 MB on newer C881-K9, C886VA-K9, C886VAJ-K9, C887VA-K9, C887VAM-K9 and C888-K9 models |
|
WAN |
● Fast Ethernet ● Multimode VDSL2 and ADSl2/2+ over ISDN with ISDN backup ● Multimode VDSL2 and ADSl2/2+ over basic telephone service ● ADSL2/2+ over ISDN with ISDN backup ● ADSL2/2+ over basic telephone service with ISDN backup ● VDSL2 over basic telephone service with ISDN backup ● Multimode G.SHDSL (2- and 4-wire support) with ISDN backup ● Fast Ethernet and 3G WAN for Code Division Multiple Access (CDMA) and High-Speed Downlink Packet Access (HSDPA) |
|
LAN switch |
Managed 4-port 10/100BASE-T with autosensing Media Device In/Media Device Cross-Over (MDI/MDX) for auto crossover |
|
Standard 802.11g/n access point based on IEEE 802.11n draft 2.0 standard |
Optional on all models |
|
Console or auxiliary port |
RJ-45 |
|
One USB 1.1 port for advanced security features such as security tokens or USB flash memory |
● One USB 1.1 port on Cisco 880 Series Routers ● USB devices supported: ◦ USB eTokens ◦ USB flash memory |
|
ISDN BRI S/T |
Available on: ● Cisco 886, 886VA, 887, 887V, 888, and 888EA for out-of-band management and dial backup or primary |
|
3G express card modem |
Available on: ● Cisco 881G, 886G, 887G, 887VG, and 888G for out-of-band management and backup or primary ● Cisco 888G for out-of-band management and backup or primary Note: Cisco 887VG currently ships with HSPA modem only. |
|
External power supply |
Universal 100 to 240 VAC input; 60W, 12 VDC output |
|
Physical dimensions and weight |
Product dimensions, nonwireless models (H x W x D): ● 1.9 x 12.8 x 9.8 in. (48 x 325 x 249 mm) (includes rubber feet) ● 1.75 x 12.8 x 9.8 in. (44 x 325 x 249 mm) (without rubber feet) Product dimensions, wireless models (H x W x D): ● 1.9 x 12.8 x 10.4 in. (48 x 325 x 264 mm) (includes rubber feet) ● 1.75 x 12.8 x 10.4 in. (44 x 325 x 264 mm) (without rubber feet; excludes antennas) ● Weight: 5.5 lb (2.5 kg) maximum |
|
Power |
Product power specifications: ● AC input voltage: 100 to 240 VAC ● Frequency: 50 to 60 Hz ● Maximum output power: 60W ● Output voltages: 12 VDC Optional internal PoE with external adapter: ● Maximum output power: 80W ● External output voltage: 48 VDC |
|
Approvals and compliance |
Emissions: ● 47 CFR Part 15: 2006 ● CISPR22: 2005 ● EN300386: V1.3.3: 2005 ● EN55022: 2006 ● EN61000-3-2: 2000 [Inc amd 1 and 2] ● EN61000-3-3: 1995 [+ amd 1: 2001] ● ICES-003 Issue 4: 2004 ● KN 22: 2005 ● VCCI: V-3/2006.04 Immunity: ● CISPR24: 1997 [+ amd 1 and 2] ● EN300386: V1.3.3: 2005 ● EN50082-1: 1992 ● EN50082-1: 1997 ● EN55024: 1998 [+ amd 1 and 2] ● EN61000-6-1: 2001 The following are supported on teleworker models: ● AS/NRZ 3548: 1992 Class B ● CFR 47 Part 15 Class B ● EN60555-2 Class B ● EN55022 Class B ● ICES-003, Issue 2, Class B, April 1997S |