C921J-4P – Cisco 921J Gigabit Ethernet security router with external power supply for Japan only Price & Datasheet

Product Model: C921J-4P

Retail Price: US$0

Email Us To Get Special Price Now: [email protected]

C921J-4P is the Cisco 921J Gigabit Ethernet security router with external power supply for Japan only. Cisco® 900J Series Integrated Services Routers (ISRs) combine Internet access, comprehensive security, and wireless services in a single high-performance device that is easy to deploy and manage. They are well suited for deployment as Customer Premises Equipment (CPE) in enterprise small branch offices and in service provider managed-service environments. The C921J-4P supported only on Cisco IOS Software Release 15.8(3)Mb and later.

Quick Spec

Table 1 shows the quick spec.

Model

C921J-4P

Description

Cisco 921J Gigabit Ethernet security router with external power supply for Japan only

WAN interfaces

2 ports Gigabit Ethernet (GE)

LAN interfaces

4-port 10/100/1000-Mbps managed switch

Integrated USB 2.0

Yes

Default and maximum DRAM

Default 1 GB

Default and maximum flash memory

2 GB; not upgradable

Dimension

1.10 x 8.50 x 6.50 in. (2.80 x 21.59 x 16.51 cm) (includes rubber feet)

Product Detail

Figure 1 shows the ports of C921J-4P.

Note:

#6-32 Ground screw

GE LAN port

Power button

GE LAN port

12VDC input

GE LAN port

Reset button

GE WAN port

System LED

Console port

USB2.0 port

Kensington Lock

GE LAN port

VPN LED

GE LAN port

 

Compare to Similar Item

Table 2 shows the comparison.

Model

C921-4P

C921J-4P

Description

Cisco 921 Gigabit Ethernet security router with internal power supply

Cisco 921J Gigabit Ethernet security router with external power supply for Japan only

WAN interfaces

1 port GE and 1 VADSL (Annex B/J)

2 ports Gigabit Ethernet (GE)

LAN interfaces

4-port GE managed switch

4-port 10/100/1000-Mbps managed switch

Integrated USB 2.0

Yes

Yes

Default and maximum DRAM

Default 1 GB

Default 1 GB

Default and maximum flash memory

2 GB; not upgradable

2 GB; not upgradable

Get More Information

Do you have any question about the C921J-4P

Contact us now via Live Chat or [email protected].

Specification

C921J-4P Datasheet

C921J-4P Specification

Description

Cisco 921J Gigabit Ethernet security router with external power supply for Japan only

WAN interfaces

2 ports Gigabit Ethernet (GE)

LAN interfaces

4-port 10/100/1000-Mbps managed switch

Integrated USB 2.0

Yes

Cisco IOS Software

IP and IP services

●  Routing Information Protocol Versions 1 and 2 (RIPv1 and RIPv2)

●  Generic Routing Encapsulation (GRE) and multipoint GRE (MGRE)

●  Cisco Express Forwarding

●  Standard 802.1d Spanning Tree Protocol

●  Layer 2 Tunneling Protocol (L2TP)

●  L2TP Version 3 (L2TPv3)

●  Network Address Translation (NAT)

●  Dynamic Host Configuration Protocol (DHCP) server, relay, and client

●  Dynamic DNS

●  DNS Proxy

●  DNS Spoofing

●  Access Control Lists (ACLs)

●  IPv4 and IPv6 multicast

●  Open Shortest Path First (OSPF)

●  Border Gateway Protocol (BGP)

●  Performance Routing (PfR)

●  Enhanced Interior Gateway Routing Protocol (EIGRP)

●  Virtual Route Forwarding (VRF) Lite

●  Next Hop Resolution Protocol (NHRP)

●  Bidirectional Forwarding Detection (BFD)

●  Web Cache Communication Protocol (WCCP)

 

Switch features

●  Auto Media Device In/Media Device Cross Over (MDI-MDX)

●  25 802.1Q VLANs

●  MAC filtering

●  Four-port 802.3af and Cisco compliant PoE

●  Switched Port Analyzer (SPAN)

●  Storm control

●  Smart ports

●  Secure MAC address

●  Internet Group Management Protocol Version 3 (IGMPv3) snooping

●  802.1X

Security features

Secure connectivity:

●  Secure Sockets Layer (SSL) VPN for secure remote access

●  Hardware-accelerated DES, 3DES, AES 128, AES 192, and AES 256

●  Public-Key-Infrastructure (PKI) support

●  50 IPsec tunnels

●  Cisco Easy VPN client and server

●  NAT transparency

●  Dynamic Multipoint VPN (DMVPN)

●  Tunnel-less Group Encrypted Transport VPN (GET VPN)

●  VRF-aware IPsec

●  IPsec over IPv6

●  Adaptive control technology

●  Session Initiation Protocol (SIP) application-layer gateway

●  Cisco IOS Firewall:

◦   Zone-based policy firewall

◦   VRF-aware stateful inspection routing firewall

◦   Stateful inspection transparent firewall

●  Advanced application inspection and control

●  Secure HTTP (HTTPS), FTP, and Telnet Authentication Proxy

●  Dynamic and static port security

●  Firewall stateful failover

●  VRF-aware firewall

●  Cisco IOS Software black and white lists

●  Integrated threat control:

◦   Intrusion Prevention System (IPS)

●  Control plane policing

●  Flexible packet matching

●  Network foundation protection

Quality of Service (QoS)

●  Low-Latency Queuing (LLQ)

●  Weighted Fair Queuing (WFQ)

●  Class-Based WFQ (CBWFQ)

●  Class-Based Traffic Shaping (CBTS)

●  Class-Based Traffic Policing (CBTP)

●  Policy-Based Routing (PBR)

●  Class-Based QoS MIB

●  Class of service (CoS)-to-differentiated services code point (DSCP) mapping

●  Class-Based Weighted Random Early Detection (CBWRED)

●  Network-Based Application Recognition (NBAR)

●  Link fragmentation and interleaving (LFI)

●  Resource Reservation Protocol (RSVP)

●  Real-Time Transport Protocol (RTP) header compression (cRTP)

●  Differentiated Services (DiffServ)

●  QoS preclassify and prefragmentation

●  Hierarchical QoS (HQoS)

Management

●  Cisco Configuration Professional

●  Cisco Configuration Express

●  Cisco Configuration Engine support

●  Cisco AutoInstall

●  Cisco IP Service-Level Agreement (IP SLA)

●  Cisco IOS Embedded Event Manager (EEM)

●  CiscoWorks

●  Cisco Security Manager

●  Telnet, Simple Network Management Protocol Version 3 (SNMPv3), Secure Shell (SSH) Protocol, command-line interface (CLI), and HTTP management

●  RADIUS and TACACS+

●  Cisco Next Generation Plug-and-Play (NG PnP) Protocol

High availability

●  Virtual Router Redundancy Protocol (VRRP) (RFC 2338)

●  HSRP

●  MHSRP

Metro Ethernet

●  Ethernet OA&M

●  Ethernet Local Management Interface (E-LMI)

●  IP SLA for Ethernet

IPv6

●  IPv6 addressing architecture

●  IPv6 name resolution

●  IPv6 statistics

●  IPv6 translation: Transport packets between IPv6-only and IPv4-only endpoints (NAT-Protocol Translation)

●  Internet Control Message Protocol Version 6 (ICMPv6)

●  IPv6 DHCP

●  OSPFv3

●  BGP4+

●  IPv6 path maximum transmission unit (PMTU)

●  IPv6 neighbor discovery

●  IPv6 stateless address autoconfiguration (SLAAC)

●  IPv6 multicast routing

Application visibility and control

●  NBAR2

●  Flexible NetFlow (FNF)

●  Performance Agent

Number of recommended users

●  50

Default and maximum DRAM

●  Default 1 GB

Default and maximum flash memory

●  2 GB on all Cisco 900J Series ISR models; not upgradable

WAN

●  Refer to Table 2 for details

LAN switch

●  Refer to Table 2 for details

Separate console ports

●  RJ-45

USB 2.0

●  One USB 2.0 Type A port available

Physical dimensions and weight

Weight: 2.04 lb (0.924 kg) maximum

Product dimensions:

●  H x W x D = 1.10 x 8.50 x 6.50 in. (2.80 x 21.59 x 16.51 cm) (includes rubber feet)

External power supply

Power specifications:

●  External power supply

●  AC input voltage: Universal 100 to 240 VAC

●  Frequency: 50 to 60 Hz

●  Maximum output power: 18W

●  Output voltages: 12 VDC

Approvals and compliance

Safety:

●  IEC 60950-1, 2nd Edition with Amendment 1 and Amendment 2 with Japan national deviations

Emissions:

●  47 CFR Part 15: 2006

◦   CISPR22: 2005

◦   EN300386: V1.3.3: 2005

◦   EN55022: 2006

◦   EN61000-3-2: 2000 [+ amd 1 & 2]

◦   EN61000-3-3: 1995 [+ amd 1: 2001]

◦   ICES-003 Issue 4: 2004

◦   KN 22: 2005

●  VCCI: V-3/2006.04

Immunity:

●  CISPR24: 1997 [+ amd 1 & 2]

◦   EN300386: V1.3.3: 2005

◦   EN50082-1: 1992

◦   EN50082-1: 1997

◦   EN55024: 1998 [+ amd 1 & 2]

◦   EN61000-6-1: 2001

Environmental operating range

●  Nonoperating temperature: -40° to 158°F (-40° to 70°C)

●  Nonoperating humidity: 5% to 95% relative humidity (noncondensing)

●  Nonoperating altitude: 0 to 15,000 ft (0 to 4570 m)

●  Operating temperature: 0° to 45°C (de-rate 1°C per 1000-ft increase in altitude)

●  Operating humidity: 5% to 95% relative humidity (noncondensing)

●  Operating altitude: 0 to 10,000 ft (0 to 3000 m)

Leave a Comment

Your email address will not be published. Required fields are marked *

Call Us Now
Scroll to Top

Warning: error_log(/www/wwwroot/corenet.vip/wp-content/plugins/spider-analyser/#log/log-1523.txt): Failed to open stream: Permission denied in /www/wwwroot/corenet.vip/wp-content/plugins/spider-analyser/spider.class.php on line 2853