S2350-28TP-PWR-EI-AC Huawei S2300 Series Switch Price & Product Datasheet

Product Model: S2350-28TP-PWR-EI-AC

Retail Price: US$1,499.00

Email Us To Get Special Price Today: [email protected]

Huawei S2300 Series Switch S2350-28TP-PWR-EI-AC 24 Ethernet 10/100 PoE+ ports, 2 Gig SFP and 2 dual-purpose 10/100/1000 or SFP,AC 110/220V,QoS, comprehensive Layer 2 Feature.

Quick Specs

Figure 1 shows the appearance of S2350-28TP-PWR-EI-AC.

Table 1 shows the Quick Specs.

Product Code

S2350-28TP-PWR-EI-AC

Ports

28

Maximum stack bandwidth (bidirectional)

10 Gbit/s

Transmission Rate

10/100/1000Mbps

Memory (RAM)

256 MB

Flash

200 MB

Mean time between failures (MTBF)

78.29 years

Stack port

Two uplink 1000BASE-X optical ports

Noise under normal temperature (27¡ãC, sound power)

less than 52 dBA

PoE

Yes

Dimensions (W x D x H)

442.0 mm x 310.0 mm x 43.6 mm

Weight

¡Ü 5 kg

Product Details

Figure 2 shows the front panel of S2350-28TP-PWR-EI-AC.

Note:

¢Ù

Twenty-four PoE+ 10/100BASE-TX electrical ports 2 Two 1000BASE-X optical ports

¢Ú

Two 1000BASE-X optical ports

Applicable modules and cables:

¡¤GE optical module l GE-CWDM optical module
¡¤GE-DWDM optical module l GE SFP copper module
¡¤Stack optical module l 1 m, 10 m SFP+ copper cables
¡¤3 m, 10 m AOC cables

¢Û

Two combo ports (10/100/1000BASE-T + 100/1000BASE-X) Modules applicable to combo optical ports: l FE optical module

¡¤GE optical module l GE-CWDM optical module
¡¤GE-DWDM optical module

¢Ü

One console port

Figure 3 shows the back panel of S2350-28TP-PWR-EI-AC.

Note:

¢Ù

Ground screw NOTE It is used with a ground cable.

¢Ú

Jack reserved for AC terminal locking latch

NOTE: The AC terminal locking latch is not delivered with the switch.

¢Û

AC power socket

NOTE: It is used with an AC power cable

The Modules

Table 2 shows the recommended elements for the S2350-28TP-PWR-EI-AC.

Model

Description

FE-SFP Optical Transceiver

SFP-FE-SX-MM1310

Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC)

eSFP-FE-LX-SM1310

Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC)

S-SFP-FE-LH40-SM1310

Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC)

GE-SFP Optical Transceiver

eSFP-GE-SX-MM850

Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC)

SFP-GE-LX-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC)

S-SFP-GE-LH40-SM1310

Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC)

S-SFP-GE-LH40-SM1550

Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC)

GE Copper Transceiver

SFP-1000BaseT

Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45)

Compare to Similar Items

Table 3 shows the comparison of S2350-28TP-PWR-EI-AC and S2350-28TP-EI-AC.

Product Code

S2350-28TP-PWR-EI-AC

S2350-28TP-EI-AC

Ports

28

28

Maximum stack bandwidth (bidirectional)

10 Gbit/s

10 Gbit/s

Transmission Rate

10/100/1000Mbps

10/100/1000Mbps

Memory (RAM)

256 MB

256 MB

Flash

200 MB

200 MB

Mean time between failures (MTBF)

78.29 years

44.3 years

Stack port

Two uplink 1000BASE-X optical ports

Two uplink 1000BASE-X optical ports

Noise under normal temperature (27¡ãC, sound power)

less than 52 dBA

0 (The device has no fans.)

PoE

Yes

No

Maximum power

consumption (100%

throughput, 100%

PoE loads, full

speed of fans)

445 W (power consumption: 75 W; PoE: 370 W)

15.7 W

Before Purchasing

Do you have any question about the S2350-28TP-PWR-EI-AC?

Contact us – Email Live Chat or [email protected].

Specification

S2350-28TP-PWR-EI-AC Datasheet

S2350-28TP-PWR-EI-AC Specifications

Technical Specifications

Item

Description

Memory (RAM)

256 MB

Flash

200 MB

Mean time between failures (MTBF)

78.29 years

Mean time to repair (MTTR)

2 hours

Availability

> 0.99999

Service port surge protection

Common mode: ±6 kV

Power supply surge protection

±6 kV in differential mode, ±6 kV in common mode

Dimensions (W x D x H)

442.0 mm x 310.0 mm x 43.6 mm (17.4 in. x 12.2 in. x 1.72 in.)

Weight

≤ 5 kg (11.02 lb)

Stack ports

Two uplink 1000Base-X optical ports

RPS

Not supported

PoE

Supported

Rated voltage range

100 V AC to 240 V AC, 50/60 Hz

Maximum voltage range

90 V AC to 264 V AC, 47 Hz to 63 Hz

Maximum power consumption (100% throughput, 100% PoE loads, full speed of fans)

445 W (system power consumption: 75 W, PoE: 370 W)

Operating temperature

-5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5096 ft.)

NOTE£º

When the altitude is between 1800 m (5096 ft.) and 5000 m (16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.).

Storage temperature

-40°C to +70°C (-40°F to +158°F)

Noise under normal temperature (27°C, sound power)

< 52 dBA

Relative humidity

5% to 95%, noncondensing

Operating altitude

0-5000 m (0-16404 ft.)

Certification

·EMC certification

·Safety certification

·Manufacturing certification

Performance Specifications

Ethernet

MAC:16K

VLAN:4K

Maximum number of Eth-Trunks:8

Maximum number of dynamic ARP entries in the system:256

QoS

Maximum number of outbound QoS queues on an interface:8

CAR:8 Kbit/s

ACL

ACLv4: Supports a maximum of 500 inbound and outbound ACLv4 entries.

ACLv6: Supports a maximum of 500 inbound and outbound ACLv6 entries.

IP unicast

IPv4 Route capacity:32

IPv6 Route capacity:16

Multicast

Number of multicast groups on the switch:1K

Reliability

RRPP:

·Maximum number of RRPP instances: 64

·Maximum number of RRPP rings: 16

·Maximum number of RRPP domains: 8

Smart Link:

· Maximum number of instances: 64

· Maximum number of Smart Link groups: 16

MSTP:

· Maximum number of MSTIs: 64

VBST:

·Number of protected VLANs: 128

SEP:

·Maximum number of segments: 16

Leave a Comment

Your email address will not be published. Required fields are marked *

Call Us Now
Scroll to Top

Warning: error_log(/www/wwwroot/corenet.vip/wp-content/plugins/spider-analyser/#log/log-0213.txt): Failed to open stream: No space left on device in /www/wwwroot/corenet.vip/wp-content/plugins/spider-analyser/spider.class.php on line 2853