WS-C2960-8TC-L Cisco 2960 Switch Price & Product Datasheet

Spread the love

Product Model: WS-C2960-8TC-L (USED)

Retail Price: US$243.00

Email Us To Get Special Price Today: [email protected]

WS-C2960G-8TC-L is one of the Cisco Catalyst 2960G Series switches. It provides 8 Ethernet 10/100 ports and 1 dual-purpose uplink (dual-purpose uplink port has 1 10/100/1000 Ethernet port,1 SFP-based Gigabit Ethernet port, 1 port active).

Quick Specs

Figure 1 shows the appearance of the WS-C2960-8TC-L.

Table 1 shows the Quick Spec of the WS-C2960-8TC-L.

Product Code	WS-C2960-8TC-L
Enclosure Type	Rack-mountable – 1U
Feature Set	LAN Base
Uplink Interfaces	1 dual-purpose (10/100/1000 or SFP) ports
Ports	8 x 10/100 ports
Throughput	2.7 Mpps
Backplane Capacity	16 Gbps
DRAM	64 MB
Dimensions	1.73 x 10.6 x 6.4 in.
Package Weight	4 Kg

Product Details

Figure 2 shows the front panel of the WS-C2960-8TC-L.

Note:

¢Ù	System LEDs
¢Ú	Mode Button
¢Û	Console port
¢Ü	8 ¡Á 10/100 ports
¢Ý	Dual-purpose port

Figure 3 shows the back panel of the WS-C2960-8TC-L.

Note: There are a AC power connector on the back panel. WS-C2960-8TC-L has no fan.

The Accessories

Table 2 shows some accessories of the WS-C2960-8TC-L.

Models	Description
GLC-LH-SM	GE SFP, LC connector LX/LH transceiver
GLC-SX-MMD	1000BASE-SX SFP transceiver module, MMF, 850nm, DOM
CAB-CONSOLE-RJ45	Console Cable 6ft with RJ45 and DB9F

Compare to Similar Items

Table 3 shows the comparison of similar items.

Models	WS-C2960-8TC-L	WS-C2960C-8TC-L
Ports	8 x 10/100 ports	8 x 10/100 Fast Ethernet
Uplinks	1 dual-purpose (10/100/1000 or SFP) ports	2 x 1G copper or 2 x 1G SFP
Feature Set	LAN Base	LAN Base

Before Purchasing

Do you have any question about the WS-C2960-8TC-L?

Specification

WS-C2960-8TC-L (USED) Datasheet

WS-C2960-8TC-L (USED) Specifications
Performance	16-Gbps switching fabric (Catalyst 2960PD-8TT-L , Catalyst 2960-8TC-L, Catalyst 2960- 24TT-L, Catalyst 2960-24TC-L, Catalyst 2960-24LT-L, Catalyst 2960-24PC-L, Catalyst 2960- 48PST-L, Catalyst 2960-48TT-L, Catalyst 2960-48TC-L) ¡ñ 32-Gbps switching fabric (Catalyst 2960G-8TC-L, Catalyst 2960G-24TC-L, Catalyst 2960G48TC-L) ¡ñ Forwarding rate based on 64-byte packets: 2.7 Mpps ¡ñ 64 MB DRAM ¡ñ 32 MB flash memory ¡ñ Configurable up to 8000 MAC addresses ¡ñ Configurable up to 255 Internet Group Management Protocol (IGMP) groups ¡ñ Configurable maximum transmission unit (MTU) of up to 9000 bytes, with a maximum Ethernet frame size of 9018 bytes (jumbo frames) for bridging on Gigabit Ethernet ports and up to 1998 bytes for bridging of Multiprotocol Label Switching (MPLS) tagged frames on both 10/100 and 10/100/1000 ports
Connectors and cabling	¡ñ 10BASE-T ports: RJ-45 connectors, 2-pair Category 3, 4, or 5 unshielded twisted-pair (UTP) cabling ¡ñ 100BASE-TX ports: RJ-45 connectors, 2-pair Category 5 UTP cabling ¡ñ 1000BASE-T ports: RJ-45 connectors, 4-pair Category 5 UTP cabling ¡ñ 1000BASE-T Small Form-Factor Pluggable (SFP)-based ports: RJ-45 connectors, 4-pair Category 5 UTP cabling ¡ñ 1000BASE-SX, -LX/LH, -ZX, -BX and CWDM SFP-based ports: LC fiber connectors (single/multimode fiber) ¡ñ 100BASE-LX, -BX, -FX: LC fiber connectors (single/multimode fiber)
Power connectors	Customers can provide power to a switch by using either the internal power supply or the Cisco RPS 675. The connectors are located at the back of the switch. ¡ñ Note: The Catalyst 2960-8TC-L and Catalyst 2960G-8TC-L do not have RPS ports. ¡ñ Internal power supply connector is an autoranging unit. that supports input voltages between 100 and 240VAC. Use the supplied AC power cord to connect the AC power connector to an AC power outlet. ¡ñ Cisco RPS connector: ? Offers connection for an optional Cisco RPS 2300 (model PWR-RPS2300) that uses AC input and supplies DC output to the switch. Only the Cisco RPS 2300 should be attached to the redundant-power-system receptacle. ? Offers a 2300W redundant power system that supports up to 6 external network devices and provides power to 2 failed devices at a time. ? Automatically senses when the internal power supply of a connected device fails and provides power to the failed device, preventing loss of network traffic.
Indicators	Per-port status: Link integrity, disabled, activity, speed, full duplex ¡ñ System status: System, RPS, link status, link duplex, link speed
Dimensions (H x W x D)	1.73 x 10.6 x 6.4 in. (4.4 x 27 x 16.3 cm)
Weight	3 lb (1.4 kg)
Environmental ranges N	Normal Operating Conditions: ¡ñ -5ºC to +45ºC, up to 5,000 feet (1500 m) ¡ñ -5ºC to +40ºC, up to 10,000 feet (3000 m) ¡ñ -5ºC to +35ºC, up to 13,000 feet (4000 m) Short-Term* Exceptional Operating Conditions: ¡ñ -5ºC to +55ºC, at sea level ¡ñ -5ºC to +50ºC, up to 5,000 feet (1500 m) ¡ñ -5ºC to +45ºC, up to 10,000 feet (3000 m) ¡ñ -5’C to +40’C, up to 13,000 feet (4000 m) * Not more than the following in a 1-year period: 96 consecutive hours, or 360 hours total, or 15 occurrences. For the Catalyst 2960G-8TC-L, reduce the high range temperature by 5°C
Acoustic noise	¡ñ ISO 7779: Bystander position operating to an ambient temperature of 25°C ¡ñ 0 dBa (no fan)
Mean time between failures (MTBF)	615,549 hrs
AC input voltage and current	100-240VAC (autoranging), 0.5-0.25A, 50-60 Hz
Power rating	0.035 kVA
DC input voltages (RPS input)	(No RPS input for Cisco Catalyst 2960PD-8TT-L , Catalyst 2960-8TC-L, and Catalyst 2960G-8TC-L)
Safety Certifications	¡ñ UL 60950-1, First Edition ¡ñ CUL to CAN/CSA 22.2 No. 60950-1, First Edition ¡ñ TUV/GS to EN 60950-1, First Edition ¡ñ CB to IEC 60950-1 with all country deviations ¡ñ AS/NZS 60950-1, First Edition ¡ñ CE Marking ¡ñ NOM (through partners and distributors)
Electromagnetic Compatibility Certifications	FCC Part 15 Class A ¡ñ EN 55022 Class A (CISPR22) ¡ñ EN 55024 (CISPR24) ¡ñ AS/NZS CISPR22 Class A ¡ñ CE ¡ñ CNS13438 Class A ¡ñ MIC ¡ñ GOST ¡ñ China EMC Certifications
Environmental	Reduction of Hazardous Substances (ROHS) 5
Telco	Common Language Equipment Identifier (CLEI) code
Warranty	Limited lifetime warranty