JG940A – HP 5130 EI Switches Price & Product Datasheet

Spread the love

Product Model: JG940A

Retail Price: US$3,999.00

Email Us To Get Special Price Today: [email protected]

HPE FlexNetwork 5130 EI Series switches are fully managed enterprise class Gigabit switches supporting Layer 3 static routing and RIP routing, IRF stacking up to nine units high, with four built in 10 Gigabit links. This JG940A has 24 x 10/100/1000 PoE+ enabled ports, 2 x 1GbE / 10GbE SFP+ ports, and 2x RJ 45 1GbE / 10GBASE T ports. Transceivers must be purchased separately.

Quick Spec

Figure 1 shows the appearance of HPE JG940A.

Table 1 shows the quick spec.

Product Code	JG940A
Type	HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch
I/O ports and slots	24 x RJ-45 autosensing 10/100/1000 ports 2 x SFP+ fixed 1000/10000 SFP+ ports 2 x RJ-45 1/10GBASE-T ports
Additional ports and slots	1 x RJ-45 serial console port
Memory and processor	1 GB SDRAM Packet buffer size: 1.5 MB 512 MB flash
Dimensions	17.32 x 14.17 x 1.72 in (43.99 x 35.99 x4.37 cm)
Weight	13.23 lb (6 Kg)

Product Details

Figure 2 shows the front panel of HPE JG940A.

Note:

¢Ù	24 ¡Á 10/100/1000Base-T autosensing Ethernet port
¢Ú	2 ¡Á SFP+ port
¢Û	2 ¡Á 1/10GBase-T autosensing Ethernet port
¢Ü	Console port
¢Ý	Port LED mode switching button
¢Þ	Port mode LED
¢ß	LEDs (10/100/1000Base-T autosensing Ethernet port LED, SFP+ port LED, System status LED (SYS),?RPS status LED (RPS), 1/10G Base-T autosensing Ethernet port LED)

Figure 3 shows the back panel of HPE JG940A.

Note:

¢Ù	AC-input power receptacle
¢Ú	RPS receptacle
¢Û	Grounding screw

Compare to Similar Items

Table 2 shows the comparison.

Product Code	JG938A	JG939A	JG940A	JG941A
Type	HPE FlexNetwork ?5130-24G-2SFP+-2XGT EI Switch	HPE FlexNetwork ?5130-48G-2SFP+-2XT EI Switch	HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch	HPE FlexNetwork 5130 48G POE+ 2SFP+ 2XGT (370W) EI Switch
I/O ports and slots	¡¤ 24 x RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only ¡¤ 2 x SFP+ fixed 1000/10000 SFP+ ports ¡¤ 2 x RJ-45 1/10GBASE-T ports	¡¤ 48 x 10/100/1000 ports, ¡¤ 2 x 1GbE / 10GbE SFP+ ports, ¡¤ 2 x RJ 45 1GbE / 10GBASE T ports.	¡¤ 24 x RJ-45 autosensing 10/100/1000 ports ¡¤ 2 x SFP+ fixed 1000/10000 SFP+ ports ¡¤ 2 x RJ-45 1/10GBASE-T ports	¡¤ 48 x RJ-45 autosensing 10/100/1000 ports ¡¤ 2 x SFP+ fixed 1000/10000 SFP+ ports ¡¤ 2 x RJ-45 1/10GBASE-T ports
Additional ports and slots	1 x RJ-45 serial console port	1 x RJ-45 serial console port	1 x RJ-45 serial console port	1 x RJ-45 serial console port

Before Purchasing

Do you have any?question about?the?JG940A

Specification

JG940A Datasheet

JG940A Specification
Type	HPE FlexNetwork 5130 24G POE+ 2SFP+ 2XGT (370W) EI Switch
Differentiator	· Gigabit Ethernet switch with 24 10/100/1000BASE-T, 2 SFP+ and 2 10GBASE-T ports · Intelligent Resilient Framework (IRF) technology, static and RIP Layer 3 routing, and PoE/PoE+, supported
Ports	· 24 x RJ-45 autosensing 10/100/1000 ports · 2 x SFP+ fixed 1000/10000 SFP+ ports · 2 x RJ-45 1/10GBASE-T ports
Memory and processor	· 1 GB SDRAM · Packet buffer size: 1.5 MB · 512 MB flash
Latency	1000 Mb Latency: < 5 µs 10 Gbps Latency: < 1.5 µs
Throughput	up to 96 Mpps
Routing/switching capacity	128 Gbps
PoE capability	370 W PoE+
Stacking capabilities	IRF 9 switches
Management features	IMC – Intelligent Management Center Command-line interface Web browser SNMP manager
Input voltage	100 – 240 VAC, rated -54 to -57 VDC, rated (depending on power supply chosen)
Operating temperature range	-5 to 45°C
Operating humidity range	10 to 90% (noncondensing)
Power consumption	425 W (maximum)
Heat dissipation	105 / 1450 BTU/hr (110.78 / 1529.75 kJ/hr)
Minimum dimensions (W x D x H)	17.32 x 14.17 x 1.72 in (43.99 x 35.99 x4.37 cm)
Weight	13.23 lb (6 Kg)