Product Model: ET1BS12708S0
Retail Price: US$4,663.00
Email Us To Get Special Price Today: [email protected]
ET1BS12708S0 is the Huawei S12708 Switch assembly chassis, including 8 slots.
Quick Specs
Figure 1 shows the S12708 appearance. ET1BS12708S0 is its assembly chassis, including no cards, modules or units.
Table 1 shows the Quick Specs.
|
Product Code |
ET1BS12708S0 |
|
Packet Forwarding Rates |
6,240 Mpps; 9,120 Mpps(With Necessary Plug-ins) |
|
Switching Capacity |
12.32 Tbit/s; 32.16 Tbit/s(With Necessary Plug-ins) |
|
MPU Slots |
2 |
|
SFU Slots |
4 |
|
Service Card Slots |
8 |
|
Energy Saving |
Energy Efficient Ethernet (802.3az) |
|
Redundancy Design |
MPUs, SFUs, power supplies, and fan modules |
|
Maximum Power Consumption of the Entire Equipment |
¡Ü 4,400W |
|
Dimensions (W x D x H) |
With cable management frames: 442 mm x 585 mm x 663.95 mm (17.4 in. x 23.0 in. x 26.1 in. (15 U)) Without cable management frames: 442 mm x 489 mm x 663.95 mm (17.4 in. x 19.3 in. x 26.1 in. (15 U)) |
|
Weight |
42 kg |
Product Details
Figure 2 shows the front structure of the ET1BS12708S0.
Note:
|
¢Ù |
Two MPUs |
|
¢Ú |
Eight service cards, including: ¡¤Open Service Platform Unit |
|
¢Û |
Four SFUs? |
|
¢Ü |
A pair of mounting brackets |
|
¢Ý |
Six ?power modules |
|
¢Þ |
Two CMUs? |
|
¢ß |
Front ESD jack |
|
¢à |
Cable management frames |
¡¤The ET1BS12708S0 is just a Chassis that it doesn’t provide cards, modules or units.The cards, modules or units must be purchased separately.
¡¤The service cards supported by a switch depends on the software version.
¡¤The mounting brackets are used to secure the chassis in a cabinet.
¡¤The ground terminal of an ESD wrist strap can be inserted in the Front ESD jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded.
¡¤The cable management frames separate cables on different cards and help route cables orderly.
Figure 3 shows the rear structure of the S12708 chassis.
Note:
|
¢Ù |
Four Fan Module? |
|
¢Ú |
Rear ESD jack |
|
¢Û |
JG ground terminal |
|
¢Ü |
Air filter |
|
¢Ý |
A pair of removable handles |
¡¤The ground terminal of an ESD wrist strap can be inserted in the Rear ESD jack. The ESD wrist strap can provide ESD protection when the chassis is reliably grounded.
¡¤The air filter prevents dust from entering the chassis.
¡¤You can install these removable handles on two sides of the chassis to lift the chassis.
The Modules, Cards
Table 2 shows the recommended elements for the ET1BS12708S0.
|
Model |
Description |
|
FE-SFP optical transceiver |
|
|
SFP-FE-SX-MM1310 |
Optical Transceiver, SFP, 100M/155M, Multi-mode Module(1310nm, 2km, LC) |
|
eSFP-FE-LX-SM1310 |
Optical Transceiver, eSFP, 100M/155M, Single-mode Module(1310nm, 15km, LC) |
|
S-SFP-FE-LH40-SM1310 |
Optical Transceiver, eSFP, FE, Single-mode Module(1310nm, 40km, LC) |
|
GE-SFP optical transceiver |
|
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
10G-SFP+ optical transceiver |
|
|
SFP-10G-USR |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
|
OMXD30000 |
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
|
OSX010000 |
Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm, 10km, LC) |
|
40GE CFP optical transceiver |
|
|
CFP-40G-SR4 |
High Speed Transceiver CFP-40G-SR4,CFP,40G,Multimode Module(850nm,4*10G,0.1km,MPO) |
|
CFP-40G-LR4 |
High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,10km,stright LC) |
|
CFP-40G-ER4 |
High Speed Transceiver,CFP,40G,Single-mode Module(1310nm band,41.25G,40km,stright LC) |
|
40GE QSFP+ optical transceiver |
|
|
QSFP-40G-eSR4 |
40GBase-eSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.3km,MPO)(Connect to four SFP+ Optical Transceiver) |
|
QSFP-40G-ER4 |
40GBase-ER4 Optical Transceiver,QSFP+,40G,Single-mode Module (1310nm,40km,LC) |
|
100GE CFP optical transceiver |
|
|
CFP-100G-SR10 |
High Speed Transceiver,CFP,100G,Multimode Module(850nm,10*10G,0.1km,MPO) |
|
CFP-100G-LR4 |
CFP, 100G, Single-mode Module(1310nm band,4*25G,10km,stright LC) |
|
CFP-100G-ER4 |
High Speed Transceiver,CFP,100G,Single-mode Module(1310nm band,4*25G,40km,stright LC) |
|
GE copper transceiver |
|
|
SFP-1000BaseT |
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
100GE interface card |
|
|
ET1D2C02FEE0 |
2-Port 100GBASE-X Interface Card(EE,CFP) ET1D2C02FEE0series) |
|
10GE interface card |
|
|
ET1D2X32SSC0 |
32-Port 10GBASE-X Interface Card(SC,SFP+) |
|
ET1D2X12SSA0 |
12-Port 10GBASE-X Interface Card(SA,SFP+) |
|
40GE interface card |
|
|
ET1D2L08QSC0 |
8-Port 40GBASE-X Interface Card(SC,QSFP+) |
|
ET1D2L02QSC0 |
2-Port 40GBASE-X Interface Card(SC,QSFP+) |
|
Centralized monitoring unit |
|
|
EH1D200CMU00 |
Centralized Monitoring Board |
|
Cluster switching system unit |
|
|
EH1D2VS08000 |
8-Port 10G Cluster Switching System Service Unit (SFP+) |
|
Firewall module |
|
|
ET1D2FW00S02 |
NGFW Module C,with HW General Security Platform Software |
|
ET1D2FW00S01 |
NGFW Module B,with HW General Security Platform Software |
|
GE/10GE interface card |
|
|
ET1D2S08SX1E |
8-Port 10GBASE-X and 8-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Combo Interface Card(X1E,RJ45/SFP/SFP+) |
|
ET1D2S04SX1E |
4-Port 10GBASE-X and 24-Port 100/1000BASE-X and 8-Port 10/100/1000BASE-T Combo Interface Card(X1E,RJ45/SFP/SFP+) |
|
Intrusion prevention system module |
|
|
ET1D2IPS0S00 |
IPS Module A,with HW General Security Platform Software |
|
Main processing unit |
|
|
ET1D2MPUA000 |
S12708/S12712,Main Processing Unit A(Optional clock) |
|
Switch fabric unit |
|
|
ET1D2SFUD000 |
S12708/S12712,Switch Fabric Unit D |
|
ET1D2SFUA000 |
S12708/S12712,Switch Fabric Unit A |
|
Wireless access controller unit |
|
|
ACU2 |
WLAN?ACU2?Access Controller Unit(128 AP Control Resource Included) |
|
GE interface card |
|
|
ET1D2T36SEA0 |
36-Port 10/100/1000BASE-T and 12-Port 100/1000BASE-X Interface Card(EA,RJ45/SFP) |
|
ET1D2G48SX1E |
48-Port 100/1000BASE-X Interface Card(X1E,SFP) |
Compare to Similar Items
Table 3 shows the comparison of ET1BS12708S0, ET1BS12704S0, ET1BS12710S0 and ET1BS12712S0.
|
Product Code |
ET1BS12708S0 |
ET1BS12704S0 |
ET1BS12712S0 |
|
Description |
Huawei S12708 Switch assembly chassis |
Huawei S12704 Switch assembly chassis |
Huawei S12712 Switch assembly chassis |
|
Packet Forwarding Rates |
6,240 Mpps; 9,120 Mpps (With Necessary Plug-ins) |
3,120 Mpps; 4,560 Mpps(With Necessary Plug-ins) |
9,120 Mpps; 12,960 Mpps (With Necessary Plug-ins) |
|
Switching Capacity |
12.32 Tbit/s; 32.16 Tbit/s (With Necessary Plug-ins) |
4.88 Tbit/s; 16.08 Tbit/s(With Necessary Plug-ins) |
17.44 Tbit/s; 44.96 Tbit/s (With Necessary Plug-ins) |
|
MPU Slots |
2 |
2 |
2 |
|
SFU Slots |
4 |
2 |
4 |
|
Service Card Slots |
8 |
4 |
12 |
|
Maximum Power Consumption of the Entire Equipment |
¡Ü 4,400W |
¡Ü 2,200W |
¡Ü 6,600W |
|
Weight |
42 kg |
29 kg |
63 kg |
Before Purchasing
Do you have any?question about?the?ET1BS12708S0
Contact us – Email Live Chat or [email protected].