Product Model: S5731S-S24T4X-A
Retail Price: US$541.00
Email Us To Get Special Price Today: [email protected]
The Huawei CloudEngine S5731S-S series switches are standard gigabit access switches tailored for the channel distribution market, with all-GE electrical downlink ports and fixed 10 GE uplink ports.
CloudEngine S5731S-S series switches are next-generation gigabit access switches. Built on Huawei’s unified Versatile Routing Platform (VRP), CloudEngine S5731S-S switches provide enhanced Layer 3 features, simple O&M, Intelligent Stack (iStack), flexible Ethernet networking, and mature IPv6 features. These feature-rich switches are widely used in scenarios such as enterprise campus access and aggregation, as well as data center access.
Quick Specs
Table 1 shows the Quick Specs.
|
Product Code |
S5731S-S24T4X-A |
|
Memory (RAM) |
4 GB |
|
Flash |
1 GB in total. To view the available flash memory size, run thedisplay versioncommand. |
|
Mean time between failures (MTBF) |
57.73 years |
|
Mean time to repair (MTTR) |
2 hours |
|
Availability |
> 0.99999 |
|
Service port surge protection |
Common mode: 6 kV |
|
Maximum power consumption (100% throughput, full speed of fans) |
114 W |
|
Typical power consumption (30% of traffic load, tested according to ATIS standard) |
88 W |
Product Details
The Huawei S5731S-S series switches provides these features and highlights:
* iStack Properties
Intelligent Stack (iStack) virtualizes multiple switches into one, improving device reliability, simplifying configuration and management, and providing configuration-free stacking.
* Simplified Network O&M
Super Virtual Fabric (SVF), leveraging plug-and-play clients, virtualizes core/aggregation switch, access switch, and Access Point (AP) into a single logical device, simplifying network O&M.
* Integrated Security Capabilities
Embedded security probes accurately identify potentially malicious traffic and collaborate with the Cybersecurity Intelligence System (CIS) to achieve network-wide collaborative security protection.
The Modules
Table 2 shows the recommended products.
|
Model |
Description |
|
PAC600S12-CB |
600W AC Power Module(Back to Front, Power panel side exhaust) |
|
eSFP-GE-SX-MM850 |
Optical Transceiver,eSFP,GE,Multi-mode Module(850nm,0.55km,LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver,eSFP,GE,Single-mode Module(1550nm,40km,LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver,eSFP,GE,Single-mode Module(1310nm,10km,LC) |
|
SFP-GE-ZBXU1 |
Optical Transceiver,eSFP,GE,BiDi Single-mode Module(1490nm(Tx)/1570nm(Rx),80km,LC) |
|
SFP-GE-LX-SM1490-BIDI |
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1490/RX1310,10km,LC) |
|
SFP-GE-ZBXD1 |
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(1570nm(Tx)/1490nm(Rx),80km,LC) |
|
LE2MGSC40DE0 |
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1310/RX1490,40km,LC) |
|
SFP-GE-LX-SM1310-BIDI |
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1310/RX1490,10km,LC) |
|
LE2MGSC40ED0 |
Optical Transceiver,eSFP,GE,BIDI Single-mode Module(TX1490/RX1310,40km,LC) |
|
SFP-GE-BXU1-SC |
1000Base,BIDI Optical Transceiver,SFP,GE,Single-mode Module(TX1490nm/RX1310nm,10km,SC) |
|
SFP-10G-iLR |
Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,1.4km,LC) |
|
SFP-10G-USR |
10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC) |
|
SFP-1000BaseT |
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
OMXD30000 |
Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.3km,LC) |
|
OSX010000 |
Optical Transceiver,SFP+,10G,Single-mode Module(1310nm,10km,LC) |
|
SFP-10G-BXD1 |
10GBase,BIDI Optical Transceiver,SFP+,10G,Single-mode Module(TX1330nm/RX1270nm,10km,LC) |
|
SFP-10G-ZR |
10GBase-ZR Optical Transceiver,SFP+,10G,Single-mode Module(1550nm,80km,LC) |
|
OSX040N01 |
Optical Transceiver,SFP+,10G,Single-mode Module(1550nm,40km,LC) |
Compare to Similar Items
Table 3 shows the comparison.
|
Product Code |
S5731S-S24P4X-A |
S5731S-S24T4X-A |
S5731S-S48P4X-A |
S5731S-S48T4X-A |
|
Memory (RAM) |
4 GB |
4 GB |
4 GB |
4 GB |
|
Flash |
1 GB in total. To view the available flash memory size, run thedisplay versioncommand. |
1 GB in total. To view the available flash memory size, run thedisplay versioncommand. |
1 GB in total. To view the available flash memory size, run thedisplay versioncommand. |
1 GB in total. To view the available flash memory size, run thedisplay versioncommand. |
|
Mean time between failures (MTBF) |
57.21 years |
57.73 years |
54.96 years |
55.31 years |
|
Stack ports |
10GE SFP+ ports on the front panel |
10GE SFP+ ports on the front panel |
10GE SFP+ ports on the front panel |
10GE SFP+ ports on the front panel |
|
RTC |
Supported |
Supported |
Supported |
Supported |
|
RPS |
Not supported |
Not supported |
Not supported |
Not supported |
|
PoE |
Supported |
Not supported |
Supported |
Not supported |
|
Maximum power consumption (100% throughput, full speed of fans) |
Not providing the PoE function: 121 W 100% PoE loads: 977 W (PoE: 720 W) |
114 W |
Not providing the PoE function: 132 W 100% PoE loads: 1750 W (PoE: 1440 W) |
124 W |
|
Typical power consumption (30% of traffic load, tested according to ATIS standard) |
95 W |
88 W |
108 W |
101 W |
Before Purchasing
Do you have any question about the S5731S-S24T4X-A
Contact us – Email Live Chat or [email protected].
S5731S-S24T4X-A Datasheet
S5731S-S24T4X-A Specification |
|
|
Memory (RAM) |
4 GB |
|
Flash |
1 GB in total. To view the available flash memory size, run the display version command. |
|
Mean time between failures (MTBF) |
57.73 years |
|
Mean time to repair (MTTR) |
2 hours |
|
Availability |
> 0.99999 |
|
Service port surge protection |
Common mode: ±6 kV |
|
Power supply surge protection |
• Using AC power modules: ±6 kV in differential mode, ±6 kV in common mode • Using DC power modules: ±2 kV in differential mode, ±4 kV in common mode |
|
Dimensions (H x W x D) |
• Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 420.0 mm (1.72 in. x 17.4 in. x 16.5 in.) • Maximum dimensions (the depth is the distance from ports on the front panel to the handle on the rear panel): 43.6 mm x 442.0 mm x 448.0 mm (1.72 in. x 17.4 in. x 17.7 in.) |
|
Weight (with packaging) |
9.35 kg (20.61 lb) |
|
Stack ports |
10GE SFP+ ports on the front panel |
|
RTC |
Supported |
|
RPS |
Not supported |
|
PoE |
Not supported |
|
Rated voltage range |
• AC input: 100 V AC to 240 V AC, 50/60 Hz • High-Voltage DC input: 240 V DC • DC input: -48 V DC to -60 V DC |
|
Maximum voltage range |
• AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz • High-Voltage DC input: 190 V DC to 290 V DC • DC input: -38.4 V DC to -72 V DC |
|
Maximum power consumption (100% throughput, full speed of fans) |
114 W |
|
Typical power consumption (30% of traffic load, tested according to ATIS standard) |
88 W |
|
Operating temperature |
-5°C to +45°C (23°F to 113°F) at an altitude of 0-1800 m (0-5906 ft.) NOTE: When the altitude is 1800-5000 m (5906-16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). The switch cannot be started when the ambient temperature is lower than 0°C (32°F). |
|
Storage temperature |
-40°C to +70°C (-40°F to +158°F) |
|
Noise under normal temperature (27°C, sound power) |
< 57.5 dB(A) |
|
Relative humidity |
5% to 95%, noncondensing |
|
Operating altitude |
0-5000 m (0-16404 ft.) |
|
Certification |
• EMC certification • Safety certification • Manufacturing certification |
|
Part number |
02353AHV |