Product Model: CE6810-LI-B-B1A
Retail Price: US$8,023.00
Email Us To Get Special Price Today: [email protected]
CE6810-LI-B-B1A is CE6810-48S4Q-LI Bundle (With 4*40GE QSFP+ Optical Moduule,2*FAN Box,Port-side Intaket,Without Power Module).
Quick Specs
Figure 1 shows the appearance of CE6810-LI-B-B1A.
Table 1 shows the Quick Specs.
Product Code |
CE6810-LI-B-B1A |
Part Number |
02350EVV |
Software Version |
V100R003C10 and later |
Fixed GE interfaces |
None |
Fixed 10GE interfaces |
48*10GE SFP+ |
Fixed 40GE interfaces |
4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces |
Fixed 100GE interfaces |
None |
Switching Capacity |
1.28 Tbit/s |
Forwarding Rate |
960 Mpps |
Maximum power consumption |
238W |
Airflow Design |
Front-to-back or back-to-front |
Dimensions (W x D x H) |
442 mm x 600 mm x 43.6 mm |
Weight (fully loaded) |
10.4 kg (22.9 lb) |
Product Details
Figure 2 shows the rear (port side) panel of CE6810-LI-B-B1A.
Note:
¢Ù |
Forty-eight 10GE SFP+ Ethernet optical ports |
¢Ú |
Four 40GE QSFP+ Ethernet optical ports |
Figure 3 shows the front (power supply side) panel of CE6810-LI-B-B1A.
Note:
¢Ù |
Power supply slot 1 |
¢Ú |
Fan slot 1 |
¢Û |
Console port |
¢Ü |
Bar code label |
¢Ý |
Fan slot 2 |
¢Þ |
Power supply slot 2 |
¢ß |
USB port |
¢à |
ETH management port |
The Modules
Table 2 shows the recommended elements for the CE6810-LI-B-B1A.
Model |
Description |
GE-SFP Optical Transceiver |
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
10G-SFP+ Optical Transceiver |
|
SFP-10G-USR |
10GBase-USR Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.1km, LC) |
OMXD30000 |
Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm, 0.3km, LC) |
40GE QSFP+ optical transceiver |
|
QSFP-40G-iSR4 ? |
40GBase-iSR4 Optical Transceiver,QSFP+,40G,Multi-mode (850nm,0.15km,MPO)(Connect to four SFP+ Optical Transceiver) |
QSFP-40G-LR4 ? |
40GBase-LR4 Optical Transceiver,QSFP+,40GE,Single-mode Module(1310nm,10km,LC) |
GE Copper Transceiver |
|
SFP-1000BaseT |
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
FAN-40EA |
|
FAN-40EA-F ? |
Fan box(EA,Front to Back,FAN panel side intake) |
FAN-40EA-B ? |
Fan box(EA,Back to Front,FAN panel side exhaust) |
Compare to Similar Items
Table 3 shows the comparison of CE6810-LI-B-B1A and CE6810-48S-LI-B.
Product Code |
CE6810-LI-B-B1A |
CE6810-48S-LI-B |
Software Version |
V100R003C10 and later |
V100R003C10 and later |
Fixed 10GE interfaces |
48*10GE SFP+ |
48*10GE SFP+ |
Fixed 40GE interfaces |
4*40GE QSFP+ A 40GE interface can be split into four 10GE interfaces |
None |
Fixed 100GE interfaces |
None |
None |
Switching Capacity |
1.28 Tbit/s |
960 Gbit/s |
Forwarding Rate |
960 Mpps |
720 Mpps |
Maximum power consumption |
238W |
178W |
Before Purchasing
Do you have any?question about?the?CE6810-LI-B-B1A
Contact us – Email Live Chat or [email protected].
CE6810-LI-B-B1A Datasheet
CE6810-LI-B-B1A Specification |
|
10G Base-T Ports |
0 |
SFP+ Ports |
48 |
QSFP+ Ports |
4 |
Switching Capacity |
1.28 Tbit/s |
Forwarding Rate |
960 Mpps |
Airflow Design |
Front-to-back or back-to-front |
Device Virtualization |
iStack |
Super Virtual Fabric (SVF) |
|
Network Virtualization |
M-LAG |
VM Awareness |
Agile Controller |
Network Convergence |
FCoE |
DCBX, PFC, and ETS |
|
Programmability |
OpenFlow |
OPS |
|
Puppet and OVSDB plugins released on open source websites (CE6810EI) |
|
Linux container for open source and customization programming |
|
Traffic Analysis |
NetStream |
sFlow |
|
VLAN |
Adding access, trunk, and hybrid interfaces to VLANs |
Default VLAN |
|
QinQ |
|
MUX VLAN |
|
GVRP |
|
ACL |
Ingress: 1,250 |
MAC Address Table |
Maximum: 128k |
Dynamic learning and aging of MAC addresses |
|
Static, dynamic, and blackhole MAC address entries |
|
Packet filtering based on source MAC addresses |
|
MAC address limiting based on ports and VLANs |
|
ARP (maximum) |
1.5k |
IPv4 FIB (maximum) |
1.5k |
IP Routing |
IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS |
IPv6 routing protocols, such as RIPng, OSPFv3, IS-ISv6, and BGP4+ (CE6810EI) |
|
IPv6 FIB (maximum) |
/ |
Multicast FIB (maximum) |
/ |
Multicast |
IGMP snooping |
Reliability |
LACP |
STP, RSTP, VBST, MSTP |
|
BPDU protection, root protection, and loop protection |
|
Smart Link and multi-instance |
|
DLDP |
|
ERPS (G.8032) |
|
VRRP, VRRP load balancing, and BFD for VRRP |
|
QoS |
Traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority |
Actions of ACL, CAR, re-marking, and scheduling |
|
Queue scheduling algorithms, including PQ, WRR, DRR, PQ + WRR, and PQ + DRR |
|
Congestion avoidance mechanisms, including WRED and tail drop |
|
Traffic shaping |
|
Configuration and Maintenance |
Console, Telnet, and SSH terminals |
Network management protocols, such as SNMPv1/v2c/v3 |
|
File upload and download through FTP and TFTP |
|
BootROM upgrade and remote upgrade |
|
802.3az Energy Efficient Ethernet (EEE) |
|
Hot patches |
|
User operation logs |
|
ZTP |
|
Security and Management |
802.1x authentication |
Command line authority control based on user levels, preventing unauthorized users from using commands |
|
DoS, ARP, and ICMP attack defenses |
|
Port isolation, port security, and sticky MAC |
|
Binding of the IP address, MAC address, interface number, and VLAN ID |
|
Authentication methods, including AAA, RADIUS, and HWTACACS |
|
Remote Network Monitoring (RMON) |
|
Dimensions (W x D x H) |
442 mm x 600 mm x 43.6 mm |
Weight (fully loaded) |
10.4 kg (22.9 lb) |
Environmental Parameters |
Operating temperature: 0°C to 40°C (32°F to 104°F) (0m to 1,800m) |
Operating Voltage |
AC: 90V to 290V |
Max. Power Consumption |
238W |