Huawei S5720S-28P-SI-AC(24 Ethernet 10/100/1000 ports,4 Gig SFP,AC 110/220V) Price & Product Datasheet

Spread the love

Product Model: S5720S-28P-SI-AC

Retail Price: US$940.00

Email Us To Get Special Price Today: [email protected]

Huawei S5720S-28P-SI-AC switch is next-generation standard gigabit Layer 3 Ethernet switch based on a new generation of high-performance hardware and Huawei Versatile Routing Platform (VRP). It provides large switching capacity and high-density GE and 10 GE uplink interfaces for users. With 24 Ethernet 10/100/1,000 ports and 4 x 10 Gig SFP, the S5720S-28P-SI-AC can be used as access or aggregation switch on campus networks or access switch in data centers. The S5720S-28P-SI-AC integrates many advanced technologies in terms of reliability, security, and energy savings to build next-generation IT networks.

Quick Specs?????

Figure 1 shows the appearance of Huawei S5720S-28P-SI-AC switch.

Table 1 shows the Quick Specs.

Product Code????????????????????????	S5720S-28P-SI-AC
Fixed Ports	24 Ethernet 10/100/1,000 ports 4 x 10 Gig SFP
Extended Slots	NA
Memory (RAM)	512 MB
Flash	240 MB
MAC Address Table Size Forwarding Performance	16 MAC
Forwarding Performance	42 Mpps
Switching Capacity	336 Gbit/s
Power Supply	AC power supply, supporting RPS
Voltage Required	AC: Rated voltage range: 100V to 240V, 50 Hz/60 Hz Maximum voltage range: 90V to 264V, 50 Hz/60 Hz
Typical Power Consumption	20.2W
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm
Weight	4.75 kg

Product Details

Figure 2 shows the front panel of Huawei S5720S-28P-SI-AC switch.

Note:?????????

¢Ù	Twenty-four 10/100/1000BASE-T ports	¢Ú	Four 1000BASE-X ports
¢Û	ETH management port	¢Ü	One USB port
¢Ý	One console port	?	?

*The console port is used with a console cable. The console cable is not delivered with the switch and needs to be separately purchased if needed.

Figure 3 shows the back panel of Huawei S5720S-28P-SI-AC switch.

Note:?????????

¢Ù	Ground screw	¢Ú	RPS socket
¢Û	Jack for AC terminal locking latch	¢Ü	AC socket

* The ground screw is used with a?ground cable.

* RPS socket is used with an?RPS cable, which is not hot swappable.

* The AC terminal locking latch is not delivered with the switch.

* AC socket is used with an?AC power cable.

Recommended Modules????

Table 2 shows the recommended optical modules.

Category	Model	Description
GE-SFP Optical Transceiver	eSFP-GE-SX-MM850	Optical Transceiver, eSFP, GE, Multi-mode Module(850nm,0.55km,LC)
	SFP-GE-LX-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,10km,LC)
	S-SFP-GE-LH40-SM1310	Optical Transceiver, eSFP, GE, Single-mode Module(1310nm,40km,LC)
	S-SFP-GE-LH40-SM1550	Optical Transceiver, eSFP, GE, Single-mode Module(1550nm,40km,LC)
	SFP-1000BaseT	Electrical Transceiver, SFP, GE, Electrical Interface Module(100m,RJ45)
10G-SFP+ Optical Transceiver	SFP-10G-USR	10GBase-USR Optical Transceiver,SFP+,10G,Multi-mode Module(850nm,0.1km,LC)
	OMXD30000	Optical Transceiver, SFP+, 10G, Multi-mode Module(850nm,0.3km,LC)
	OSX010000	Optical Transceiver, SFP+, 10G, Single-mode Module(1310nm,10km,LC)

Compare with Similar Item

Table 3 shows the comparison of Huawei S5720-28P-SI-AC and S5720S-28P-SI-AC.

Models	S5720-28P-SI-AC	S5720S-28P-SI-AC
Fixed Ports	– 24 Ethernet 10/100/1,000 ports, 4 of which are dual-purpose?10/100/1,000 or SFP – 4 Gig SFP – 24 Ethernet 10/100/1,000 ports – 4 x Gig SFP	? – 24 Ethernet 10/100/1,000 ports – 4 x 10 Gig SFP
Extended Slots	N/A	N/A
Power Supply	Double hot swappable AC/DC power supplies, one AC/DC power module is configured by default	AC power supply, supporting RPS
Forwarding Performance	42 Mpps	42 Mpps
Switching Capacity	336 Gbit/s	336 Gbit/s
Power Consumption	21.2W	20.2W

Before Purchasing

Do you have any?question about?the?Huawei S5720S-28P-SI-AC switch

Specification

S5720S-28P-SI-AC Datasheet

S5720S-28P-SI-AC Specification
Fixed Ports	24 x Ethernet 10/100/1,000 ports P series: 4 x Gig SFP X series: 4 x 10 Gig SFP+
Extended Slot	N/A
MAC Address Table	IEEE 802.1d compliance 16K MAC address entries MAC address learning and aging Static, dynamic, and black hole MAC address entries Packet filtering based on source MAC addresses
VLAN	4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping
Ring Protection	RRPP ring topology and RRPP multi-instance Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover SEP ERPS (G.8032) STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) BPDU protection, root protection, and loop protection
IP Routing	Static route, RIPv1, RIPv2, RIPng, ECMP, OSPF, OSPFv3, BGP, BGP4+, IS-IS, IS-ISv6, VRRP, and VRRP6
IPv6 Features	Neighbor Discovery (ND) Path MTU (PMTU) IPv6 ping, IPv6 tracert, and IPv6 Telnet ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type MLD v1/v2 snooping 6to4 tunnel, ISATAP tunnel, and manually configured tunnel
Multicast	PIM DM, PIM SM, PIM SSM IGMP v1/v2/v3 snooping and IGMP fast leave Multicast forwarding in a VLAN and multicast replication between VLANs Multicast load balancing among member ports of a trunk Controllable multicast Port-based multicast traffic statistics
QoS/ACL	Rate limiting on packets sent and received by an interface Packet redirection Port-based traffic policing and two-rate three-color CAR Eight queues on each port WRR, DRR, SP, WRR + SP, and DRR + SP queue scheduling algorithms Re-marking of the 802.1p priority and DSCP priority Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address TCP/UDP port number, protocol type, and VLAN ID Rate limiting in each queue and traffic shaping on ports
Security	User privilege management and password protection DoS attack defense, ARP attack defense, and ICMP attack defense Binding of the IP address, MAC address, interface, and VLAN Port isolation, port security, and sticky MAC Blackhole MAC address entries MAC Forced Forwarding (MFF) Limit on the number of learned MAC addresses 802.1x authentication and limit on the number of users on an interface AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC SSH v2.0 Hypertext Transfer Protocol Secure (HTTPS) CPU defense Blacklist and whitelist 802.1x authentication, MAC address authentication, and combined authentication on a per port basis Portal authentication on a per VLANIF interface basis MACSec
Super Virtual Fabric (SVF)	Working as an SVF client that is plug-and-play with zero configuration Automatically loading the system software package and patches of clients One-click and automatic delivery of service configurations Supports independent running client
Management and Maintenance	iStack Virtual cable test SNMP v1/v2c/v3 RMON Web-based NMS System logs and alarms of different levels sFlow
Interoperability	Supports VBST (Compatible with PVST/PVST+/RPVST) Supports LNP (Similar to DTP) Supports VCMP (Similar to VTP)
Surge Protection	Surge protection capability of service ports: 6 kV
Operating Environment	Operating temperature: Zero to 1,800m altitude: 0°C to 45°C 1,800m to 5,000m altitude: Operating temperature reduces by 1°C for every 220m increase in altitude Relative humidity: 5% to 95% (non-condensing)
Input Voltage	AC: Rated voltage range: 100V to 240V, 50 Hz/60 Hz Maximum voltage range: 90V to 264V, 50 Hz/60 Hz
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm
Typical Power Consumption	20.2W