Product Model: A9K-RSP440-SE
Retail Price: US$34,210.00
Email Us To Get Special Price Now: [email protected]
A9K-RSP440-SE is the Cisco ASR 9000 Route Switch Processor with 440G/slot Fabric and 12GB. The Cisco ASR 9000 Series Route Switch Processor 440 (RSP 440) is a main system processor for Cisco ASR 9000 Series. It supports scalable, low-power, next-generation platforms, as well as required by today’s service provider networks.
Quick Specs
This figure shows the appearance of A9K-RSP440-SE.
Table 1 shows the quick specs.
|
Model |
A9K-RSP440-SE |
|
Type |
Cisco ASR 9000 Route Switch Processor with 440G/slot Fabric and 12GB |
|
Switch fabric |
High-capacity full-duplex integrated dual-switch fabric 220 Gbps/slot with single RSP 440 Gbps/slot with dual RSP |
|
Memory internal |
12-GB ECC-protected DRAM for A9K-RSP440-SE Solid state disk: two 16-GB SSDs 8-GB embedded USB |
|
Memory external |
USB 2.0 Type A receptacle |
Compatibility
Table 2 shows the compatibility products of A9K-RSP440-SE.
|
Model |
Description |
|
ASR-9010-DC |
Cisco ASR 9010 DC Chassis |
|
ASR-9010-DC-V2 |
ASR 9010 DC Chassis with PEM Version 2 |
|
ASR-9010-AC |
Cisco ASR 9010 AC Chassis |
|
ASR-9010-AC-V2 |
ASR 9010 AC Chassis with PEM Version 2 |
|
ASR-9006-DC |
Cisco ASR 9006 DC Chassis |
|
ASR-9006-DC-V2 |
ASR-9006-DC-V2 ASR 9006 DC Chassis with PEM Version 2 |
|
ASR-9006-AC |
Cisco ASR 9006 AC Chassis |
|
ASR-9006-AC-V2 |
ASR-9006-AC-V2 ASR 9006 AC Chassis with PEM Version 2 |
Compare to Similar Item
Table 3 shows the comparison between A9K-RSP440-TR and A9K-RSP440-SE.
|
Model |
A9K-RSP440-TR |
A9K-RSP440-SE |
|
Type |
Cisco ASR 9000 Route Switch Processor with 440G/slot Fabric and 6GB |
Cisco ASR 9000 Route Switch Processor with 440G/slot Fabric and 12GB |
|
Switch fabric |
High-capacity full-duplex integrated dual-switch fabric 220 Gbps/slot with single RSP 440 Gbps/slot with dual RSP |
High-capacity full-duplex integrated dual-switch fabric 220 Gbps/slot with single RSP 440 Gbps/slot with dual RSP |
|
Memory internal |
6-GB Error-Correcting Code (ECC)-protected DRAM for A9K-RSP440-TR Solid state disk: two 16-GB SSDs 8-GB embedded USB |
12-GB ECC-protected DRAM for A9K-RSP440-SE Solid state disk: two 16-GB SSDs 8-GB embedded USB |
|
Memory external |
USB 2.0 Type A receptacle |
USB 2.0 Type A receptacle |
Get more information
Do you have any question about the Cisco A9K-RSP440-SE
Contact us now via Live Chat or [email protected].
Specification
A9K-RSP440-SE Datasheet
A9K-RSP440-SE Specifications |
|
|
Switch fabric |
◦ High-capacity full-duplex integrated dual-switch fabric ◦ 220 Gbps/slot with single RSP ◦ 440 Gbps/slot with dual RSP |
|
Memory internal |
◦ 12-GB ECC-protected DRAM for A9K-RSP440-SE ◦ Solid state disk: two 16-GB SSDs ◦ 8-GB embedded USB |
|
Memory external |
◦ USB 2.0 Type A receptacle |
|
Timing system |
◦ Timing: Two independent clock source connections ◦ IEEE 1588 support: Copper 10/100-Mbps RJ-45 Ethernet port ◦ GPS ◦ ToD (RS422 and RS232) ◦ 1-pps RS422 or 1.0/2.3 50-ohm RF connector ◦ 10MHz in/out 1.0/2.3 50-ohm RF connector |
|
Management |
◦ Two 100/1000 BASE-T (RJ-45) LAN management ports ◦ One console port ◦ One auxiliary port ◦ Two 10-GE Small Form-Factor Pluggable Plus (SFP+) virtualization cluster ports |
|
Alarms |
◦ Alarm outputs: Critical alarm (CR), major alarm (MJ), and minor alarm (MN) |
|
LEDs |
◦ Amber alarm cut-off (ACO) and lamp test ◦ System synchronization alarm (SYNC) ◦ Compact Flash activity (CF) ◦ Solid State Drive (SSD) ◦ Fan tray visual indicator (UFAN/LFAN) |