Product Model: SFP-10G-LR
Retail Price: US$189.00
Email Us To Get Special Price Today: [email protected]
The Cisco® 10GBASE SFP+ modules give you a wide variety of 10 Gigabit Ethernet connectivity options for data center, enterprise wiring closet, and service provider transport applications. The Cisco 10GBASE-LR Module supports a link length of 10 kilometers on standard Single-Mode Fiber
Quick Spec
Table 1 shows the quick specs of SFP-10G-ER.
| Brand | Cisco |
| Product ID | SFP-10G-ER |
| Wavelength | 1310nm |
| Cable Type | SMF |
| Core Size (Microns) | G.652 |
Figure 1 shows the appearance of SFP-10G-LR.
Features and benefits
Cisco SFP+ modules offer the following features and benefits.
- ● Industry’ s smallest 10G form factor for greatest density per chassis
- ● Hot-swappable input/output device that plugs into an Ethernet SFP+ port of a Cisco switch (no need to power down if installing or replacing)
- ● Supports “pay-as-you-populate” model for investment protection and ease of technology migration
- ● Digital optical monitoring capability for strong diagnostic capabilities
- ● Optical interoperability with 10GBASE XENPAK, 10GBASE X2, and 10GBASE XFP interfaces on the same link
- ● Cisco quality Identification (ID) feature enables a Cisco platform to identify whether the module is certified and tested by Cisco
Get More Information
Contact us through Live Chat or email us at [email protected] for further information about the product and its price. Check Cisco SFP-10G-LR price and Cisco SFP-10G-LR datasheet, buy Cisco SFP-10G-LR Transceiver with the best price and fast shipping. Free Live Chat is supported.
SFP-10G-LR Datasheet
SFP-10G-ER Manual |
|
|
Type |
10GBASE-ER 1550nm SMF |
|
Wavelength (nm) |
1550 |
|
Transmit and Receive Wavelength (nm) |
1530 to 1565 |
|
Cable Type |
SMF |
|
Core Size (Microns) |
G.652 |
|
Modal Bandwidth (MHz*km) |
– |
|
Cable Distance |
40km |
|
Transmit Power (dBm) |
Maximum: 4.0 Minimum: -4.7 |
|
Receive Power (dBm) |
Maximum: -1 Minimum: -15.8 |
|
Bail Latch Color |
Red |
|
Power Consumption (W) |
1.5 |
|
Operating Temperature Range |
COM |
|
Minimum Software Requirement |
Cisco IOS XE Software Release 16.8.1 |
Note:
● Output power is per power supply unless otherwise stated.
● Heat-dissipation numbers represent the power conversion losses of the power supply in operation.
● The number of power devices supported depends upon the customer configuration.