Product Model: S5700-28P-LI-4AH
Retail Price: Price expired
Email Us To Get Special Price Today: [email protected]

Huawei S5700-28P-LI-4AH is one of the S5700-LI switches. The S5700-LI series gigabit enterprise switches (S5700-LI) are next-generation energy-saving switches developed by Huawei to meet the demand for high-bandwidth access and Ethernet multi-service aggregation. Based on cutting-edge hardware and Huawei Versatile Routing Platform (VRP) software, the S5700-LI provides a large switching capacity and high-density GE ports. The S5700-LI can be used in various enterprise network scenarios. For example, it can function as an access or aggregation switch on a campus network, a gigabit access switch in an Internet data center (IDC), or a desktop switch to provide 1000 Mbit/s access for terminals. The S5700-LI is easy to install and maintain, reducing workloads for network planning, construction, and maintenance. Featuring advanced reliability, security, and energy conservation technologies, the S5700-LI helps enterprise customers build next-generation IT networks.
Quick Specs
Figure 1 shows the appearance of S5700-28P-LI-4AH.
Table 1 shows the Quick Specs.
|
Product Code |
S5700-28P-LI-4AH |
|
Fixed Interfaces |
24 ¡Á 10/100/1000Base-T, 4 ¡Á 1000Base-X SFP |
|
Power Supply |
|
|
Forwarding Performance |
42 Mpps |
|
Switching Capacity |
256 Gbps |
|
power consumption |
<23W |
|
Dimensions (W x D x H) |
442 mm x 310 mm x 43.6 mm |
The Modules
Table 2 shows the recommended elements for the S5700-28P-LI-4AH.
|
Model |
Description |
|
GE-SFP Optical Transceiver |
|
|
eSFP-GE-SX-MM850 |
Optical Transceiver, eSFP, GE, Multi-mode Module(850nm, 0.55km, LC) |
|
SFP-GE-LX-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 10km, LC) |
|
S-SFP-GE-LH40-SM1310 |
Optical Transceiver, eSFP, GE, Single-mode Module(1310nm, 40km, LC) |
|
S-SFP-GE-LH40-SM1550 |
Optical Transceiver, eSFP, GE, Single-mode Module(1550nm, 40km, LC) |
|
GE Copper Transceiver |
|
|
SFP-10G-USR |
Electrical Transceiver,SFP,GE,Electrical Interface Module(100m,RJ45) |
|
Lithium Battery Module |
|
|
BAT-8AHA |
Huawei BAT-8AHA Rechargeable Battery for S5700 |
|
BAT-4AHA
|
Huawei BAT-4AHA BAT-4AHA Lithium ion battery unit for S5700 |
Compare to Similar Items
Table 3 shows the comparison of S5700-28P-LI-4AH and S5700-28P-LI-24S-4AH.
|
Product Code |
S5700-28P-LI-4AH |
S5700-28P-LI-24S-4AH |
|
Fixed Interfaces |
24×10/100/1000Base-T Ethernet ports, 4xGE SFP ports |
28xGE SFP ports, 4xCombo 10/100/1000Base-T Ethernet ports |
|
Power Supply |
|
|
|
Forwarding Performance |
42 Mpps |
42 Mpps |
|
Switching Capacity |
256 Gbps |
256 Gbit/s |
|
power consumption |
<23W |
<34.1W |
|
Dimensions (W x D x H) |
442 mm x 310 mm x 43.6 mm |
442 mm x 310 mm x 43.6 mm |
Before Purchasing
Do you have any question about the S5700-28P-LI-4AH?
Contact us – Email Live Chat or [email protected].
S5700-28P-LI-4AH Datasheet
S5700-28P-LI-4AH Specification |
|
|
Fixed port |
24 ¡Á 10/100/1000Base-T, 4 ¡Á 1000Base-X SFP |
|
MAC address table |
IEEE 802.1d compliance |
|
MAC address learning and aging |
|
|
Static, dynamic, and blackhole MAC address entries |
|
|
Packet filtering based on source MAC addresses |
|
|
MAC address entries: 16K |
|
|
VLAN |
4K VLANs Guest VLAN and voice VLAN GVRP MUX VLAN VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports 1:1 and N:1 VLAN Mapping |
|
Ring protection |
RRPP ring topology and RRPP multi-instance |
|
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover |
|
|
SEP |
|
|
ERPS(G.8032) |
|
|
STP, RSTP, and MSTP |
|
|
BPDU protection, root protection, and loop protection |
|
|
BPDU Tunnel |
|
|
Reliability |
Ethernet OAM (IEEE 802.3ah and 802.1ag) |
|
ITU-Y.1731 |
|
|
DLDP |
|
|
LACP |
|
|
MPLS features |
MPLS L3VPN |
|
MPLS L2VPN(VPWS/VPLS) |
|
|
MPLS-TE |
|
|
MPLS QoS |
|
|
IP routing |
Static routing |
|
IPv6 features |
Neighbor Discovery (ND) |
|
Path MTU (PMTU) |
|
|
IPv6 ping, IPv6 tracert, and IPv6 Telnet |
|
|
ACLs based on the source IPv6 address, destination IPv6 address, Layer 4 ports, or protocol type |
|
|
MLD v1/v2 snooping |
|
|
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave |
|
Multicast forwarding in a VLAN and multicast replication between VLANs |
|
|
Multicast load balancing among member ports of a trunk |
|
|
Controllable multicast |
|
|
Port-based multicast traffic statistics |
|
|
QoS/ACL |
Rate limiting on packets sent and received by an interface |
|
Packet redirection |
|
|
Port-based traffic policing and two-rate three-color CAR |
|
|
Eight queues on each port |
|
|
WRR, DRR, SP, WRR+SP, and DRR+SP queue scheduling algorithms |
|
|
Re-marking of the 802.1p priority and DSCP priority |
|
|
Packet filtering at Layers 2 through 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, TCP/UDP port number, protocol type, and VLAN ID |
|
|
Rate limiting in each queue and traffic shaping on ports |
|
|
Security |
User privilege management and password protection |
|
DoS attack defense, ARP attack defense, and ICMP attack defense |
|
|
Binding of the IP address, MAC address, interface, and VLAN |
|
|
Port isolation, port security, and sticky MAC |
|
|
MFF |
|
|
Blackhole MAC address entries |
|
|
Limit on the number of learned MAC addresses |
|
|
802.1x authentication and limit on the number of users on an interface |
|
|
AAA authentication, RADIUS authentication, HWTACACS authentication, and NAC |
|
|
SSH v2.0 |
|
|
Hypertext Transfer Protocol Secure (HTTPS) |
|
|
CPU defense |
|
|
Blacklist and whitelist |
|
|
Access Security |
DHCP Relay, DHCP Server, DHCP Snooping, DHCP Security |
|
Management and maintenance |
Virtual cable test |
|
Port mirroring and RSPAN (remote port mirroring) |
|
|
Remote configuration and maintenance using Telnet |
|
|
SNMP v1/v2c/v3 |
|
|
RMON |
|
|
Web NMS |
|
|
HGMP |
|
|
System logs and alarms of different levels |
|
|
802.3az EEE |
|
|
Dying gasp |
|
|
sFlow |
|
|
Interoperability |
Supports VBST (Compatible with PVST/PVST+/RPVST) |
|
Supports LNP (Similar to DTP) |
|
|
Supports VCMP (Similar to VTP) |
|
|
Operating environment |
Operating temperature: 0¡æ¨C50¡æ |
|
Relative humidity: 10%¨C90% (non-condensing) |
|
|
Input voltage |
AC: -Rated voltage range: 100 V to 240 V AC, 50/60 Hz -Maximum voltage range: 90 V to 264 V AC, 47/63 Hz |
|
DC: -Rated voltage range: ¨C48 V to ¨C60 V, DC -Maximum voltage range: ¨C36 V to ¨C72 V DC Note: PoE-support switches do not use DC power supplies. |
|
|
Dimensions (W x D x H) |
442 x 310 x 43.6 mm |
|
Powerconsumption |
<23W |